Festool 495542 Stop Flag

[City Properties Inc]

Hello all, Can anyone tell me if this stop can be used on t-track? I've made a couple new work benches to be used in/out of shop and was looking to add a track for repetitive stop etc. Would prefer to have routered and set flush to the table tops.

Thank you all in advance. And please feel free to post any picts of any work benches or work stations.
Yanni
citydecksinc.com
citypropertiesinc.net

 

[tjbnwi]

That would depend on the dimensions of the T-track. I have 10 of them set up on the UG wings that are set up on my MFT 3. I used the stops to size the parts for the 240 vanities I just finished.

I'll measure one of the blocks tomorrow and post the dimensions.

Tom

 

[bkharman]

It fits. But it is a bit loose. The guide is quite a bit smaller than the opening for an Incra track.

 

[bkharman]

Forgot to add...  If you are going flush with your tracks, you might want these stops. They work well with flush.
http://www.amazon.com/gp/aw/d/B00BMNPQJE/ref=pd_aw_sbs_6?pi=SL500_SS115

Also look into Kreg and Peachtree, they make quality stops as well.

 

[skids]

Hello all, Can anyone tell me if this stop can be used on t-track? I've made a couple new work benches to be used in/out of shop and was looking to add a track for repetitive stop etc. Would prefer to have routered and set flush to the table tops.

Thank you all in advance. And please feel free to post any picts of any work benches or work stations.
Yanni
citydecksinc.com
citypropertiesinc.net

You have to really crank the festool stop tight and even then it moves with Incra.

I just set up some Incra with the woodpeckers aluminum flip stop and there is zero slop. It's a nice set up.

The Kreg requires a 2 inch fence which is cumbersome and gets in the way and the stops have play in them. Just gave mine away recently and my new set up is much preferred.