Festool ct 15. Two thumbs way up

[Toolabundant]

Pics [attachimg=1][attachimg=2]

 

[squall_line]

Can't you turn the OF1010 around and use the T-Loc to attach it?

 

[Toolabundant]

Can't you turn the OF1010 around and use the T-Loc to attach it?

I don’t think so. I’ll check

 

[FestitaMakool]

Can't you turn the OF1010 around and use the T-Loc to attach it?

Yes, you can.

 

[Coen]

Can't you turn the OF1010 around and use the T-Loc to attach it?

I don’t think so. I’ll check

Yes you can. But you have to 'hook' the Systainer's feet in. It's not just a vertical 'drop on and lock'.

 

[Toolabundant]

Works but the little tabs work the other way. [attachimg=1]

 

[imdking]

Congratulations. Looks like you're all set now.

 

[Toolabundant]

Festool y adapter works with lid open. You can close lid top with y adapter in( not with hose connected to y with lid shut. [attachimg=1][attachimg=2]

 

[FestitaMakool]

You could also try ordering this adapter. I’ve got two and use them for intended an various other tasks:

[attachimg=1]

 

[Coen]

Since when is the gray hose anti-static? Or is the picture outdated?

From the Y-hose for the CS, there are 3 pictures;

Black hose, note different hose ends;
View attachment 1
Gray hose
View attachment 2
Black/green (AS?) hose;
View attachment 3

And I know for sure a hybrid of the first and 2nd pictures exist; gray hose and the hose-ends without free rotation that are pictured on the black hose.

 

[squall_line]

Since when is the gray hose anti-static? Or is the picture outdated?

The "connection coupling, anti-static D50/D50 VM-AS" is the coupler only, which is anti-static.  The gray hose is still non-anti-static.
https://www.festoolusa.com/accessory/493047---d-50d-50-vm-as

 

[Toolabundant]

You could also try ordering this adapter. I’ve got two and use them for intended an various other tasks:

[attachimg=1]

I did it’s on its way from Amazon uk

 

[Toolabundant]

Drilled hole for bench dog table . The Festool hose fits but I used adapters as to not damage the mdf/laminate by removing and attaching hose.  Must work on sealing cabinet / work on air flow to port. Doesn’t work to well. [attachimg=1][attachimg=2]

 

[Toolabundant]

Hose to y works well[attachimg=1]

 

[Toolabundant]

Hooked up with one hose and other end plugged. [attachimg=1][attachimg=2]

 

[Coen]

Hey was the angle of the Y changed? Now it looks closer to 3x120 degrees while in the past it was more like 60 degrees + 2x150 degrees

 

[squall_line]

Hey was the angle of the Y changed? Now it looks closer to 3x120 degrees while in the past it was more like 60 degrees + 2x150 degrees

I think that's an optical illusion from the camera angle.  Both of the Y adapters that I have look much more like 60 + 2x150, and are brand new.

 

[Toolabundant]

Here’s a better view[attachimg=1]

 

[Toolabundant]

Got the compact cleaner accessories kit. Like that the attachments are stored but it’s poorly executed. Need to really push lid down . They barely fit. As impressed as I was that the 1010 router is well thought out the cleaning kit was really just thrown together . [attachimg=1][attachimg=2]

 

[Coen]

Yeah the bottom foam is thicker compared to the same in Classic Systainer. I also don't get why all these sets are missing the brush.

Also if you mount it with the T... the handle will make the combo wider...