For Sale: Festool VS600 System with templates and Bits

[cdconey]

VS600 Joining System.In good condition. I would prefer selling as a set. If I can sell all items individually, I will consider breaking up the system. $425 shipped to Lower 48.

•VS600 Jointing System – Used. A few small dimples where the dowel cutter pint has gone thru the material, but does not impact operation or accuracy.
•SZ14 Half Blind Dovetail template with Copy ring – new never used
•490992 Carbide 14.3mm dovetail bit – new never used
•DS32 Doweling 32mm template. Used with a slight dimple from the dowel bit which does not affect operation or accuracy.
•491068 8mm dowel drill
•Additional hold down knobs
•VS600 Extractor Hood
•Manuals
[attachthumb=#][attachthumb=#] [attachthumb=#][attachthumb=#]

 

[cdconey]

$425 OBO including shipping to lower 48.  I no longer use this system.  Works fantastic, just need to make room in my shop.

 

[Marc2010]

I have to say that that's a good deal!!  I have just been using mine for the past few days. 15 medium size drawers and 3 big ones. It took about 1 hour from never setting one up before and then your off to the races.  I love this Festool Jig.
I have made a couple of videos that I will be putting up after editing about the VS600, How to set the jig and then how to mark your material to router.
There are very few videos on this so I thought I would add my version to the mix.

If someone is interested in this I'd jump on it. It is a nice set up!!

Marc

 

[Alan m]

I have to say that that's a good deal!!  I have just been using mine for the past few days. 15 medium size drawers and 3 big ones. It took about 1 hour from never setting one up before and then your off to the races.  I love this Festool Jig.
I have made a couple of videos that I will be putting up after editing about the VS600, How to set the jig and then how to mark your material to router.
There are very few videos on this so I thought I would add my version to the mix.

If someone is interested in this I'd jump on it. It is a nice set up!!

Marc

where are you putting these videos. i would be interested in seeing them

 

[Mike Noh]

$425 OBO including shipping to lower 48.  I no longer use this system.  Works fantastic, just need to make room in my shop.

Hi, PM sent to you.

 

[Marc2010]

Hi Alan

Sorry for the delay
I am finishing the video's up this week. (I don't have a camera man or one mounted to the ceiling ... but I will)  Jerry's work explains it very well and he was so cool to answer questions that I had.Download and print his manual.
I did need to have hands on troubleshooting and once I saw the problems with adjustments and adjusted it on my own jig it was easy to remember. I have used 5/8 & 3/4 stock. Again I have only used it for the past few months but I think I've got it now.
If the VS600 is going to be discontinued I would get it while you can and the templates.

 

[Alan m]

i thought you might have a blog or website that you were posting on. i dont use that jig but thoght that if you did a video on this you might have other content that i would use

 

[cdconey]

Still available.  PM if interested.