Hammer K3 Winner **SOLD**

[Rob Z]

**A3-31 Jointer / Planer has sold**

**K3 sliding table saw has sold**

 

The K3 is set up the way you see this saw on the Felder website (see link)  and includes the rolling carriage and is set up with the scoring unit and for dado cutters.  I will provide the scoring unit blade with this saw because I am not going to order that on the new machinery.  I am keeping my dado set so that is NOT included. I will include one 10" combination blade with this saw.
https://www.felder-group.com/us-us/products/sliding-table-saws/table-saw-k3-winner-79x48.html

If you are  interested in seeing the saw  please contact me by PM and I will call you  to arrange a time to meet. It is in my shop (south of Dulles Airport, Loudoun County, zip code 20152)  and can be seen under power.

 

[Rob Z]

Pictures of the Jointer-Planer  **SOLD**

 

[Rob Z]

Pictures of the sliding table saw  **SOLD**

 

[Rob Z]

I've received several questions asking about the width of the saw base and whether it will fit through a door.

The widest part of the sheet metal base is at the top (where the red metal is located) and that is 30" wide.    But the metal post you can see  closest to the camera is for a hand wheel and I don't think that can be removed.  That adds  another 7/8" to the width.

On the right side of the saw there is the strain relief connector for the cable but that could be removed temporarily.

It appears that the base for the  swing arm (in the rear of the cabinet) can be removed.  I have not verified this.

So, I think this saw would go through a 2-8 door as long as the rolling carriage , the sheet metal extensions on the right  and the steel bar for the fence have been removed.

 

[Rob Z]

K3 is sold, pending pickup.  Thanks everyone for the interest.