Our daughter has a 105# baby that can no longer walk or even stand without assistance. Yesterday, she received a 4x4 to help him get around. He is 11 years old and still has a good heart and still has a mischievous attitude. In case you are wondering, the Big Baby is a Yellow Lab. Andrea has had her problems with him getting up onto kitchen counters (her house And ours) to help himself to such things as ... well... just about anything that is edible...or even non-edible for that matter. Theupside is that she will no longer have to worry about that problem.
The 4x4 is a Walkin' Wheels (lots about it on Youtube) as he can no longer use even his front legs without assistance. Our daughter has been going to weight lifting classes to get herself into shape and learn more about proper lifting procedures. she has had to lift him several times a day for all summer this year.
She will be coming home sometime soon, so I want to build a set of ramps so he can move around in our yard without needing a forklift to transport him. there are four spots where I would need to add ramps, one of which should be about 8 feet in length to get 15:1 slope. I am thinking a sheet of T-111 should do the trick. I have not used that material in years except a sheet I had gotten to make bat houses for daughter (not the family bats that she has learned to tolerate long ago. she moved away [unsure]) . as soon as i got the material, her situation changed and i used the wood to make tool shelves.
I am wondering if the rough fibers of the surface would turn splintery if out in the rain. If it does, does it make sense to wet it so the grain stands up and then give a very light sanding just to smooth off the fibers so they are not so sharp, but still gritty? As i remember, I never wore gloves when using it outside. A dogs foot pads are tougher than my hand hide, i am sure. But the dog in question no longer runs, or even walks outside without assistance. I don't think he is as tough as he once was.
Tinker
The 4x4 is a Walkin' Wheels (lots about it on Youtube) as he can no longer use even his front legs without assistance. Our daughter has been going to weight lifting classes to get herself into shape and learn more about proper lifting procedures. she has had to lift him several times a day for all summer this year.
She will be coming home sometime soon, so I want to build a set of ramps so he can move around in our yard without needing a forklift to transport him. there are four spots where I would need to add ramps, one of which should be about 8 feet in length to get 15:1 slope. I am thinking a sheet of T-111 should do the trick. I have not used that material in years except a sheet I had gotten to make bat houses for daughter (not the family bats that she has learned to tolerate long ago. she moved away [unsure]) . as soon as i got the material, her situation changed and i used the wood to make tool shelves.
I am wondering if the rough fibers of the surface would turn splintery if out in the rain. If it does, does it make sense to wet it so the grain stands up and then give a very light sanding just to smooth off the fibers so they are not so sharp, but still gritty? As i remember, I never wore gloves when using it outside. A dogs foot pads are tougher than my hand hide, i am sure. But the dog in question no longer runs, or even walks outside without assistance. I don't think he is as tough as he once was.
Tinker