I wish for an edgebander stuffed into a sys 5

[Jonhilgen]

I've been doing a lot of on site repairs and modifications using iron on edge banding.  My buddy and I were joking that festool needs to come up with one that would fit in a sys 5.

So get to it.

Jon

 

[Oldwood]

Hi,

I use this stuff for those odd repairs.
http://www.fastcap.com/estore/pc/Fastedge-c40.htm
If they don't have a matching edge tape you can use the speed tape to make your own from PVC unglued edge tape.
http://www.fastcap.com/estore/pc/viewPrd.asp?idproduct=310&idcategory=0

Gerry

 

[Alan m]

that would be pritty cool. have a drawer on the front that pullls out to leave the slot for the pannel, the drawer would hold all the bits and bobs. have the top open to feed in glue and tape etc.
if the drawer was at a height of a sys1 plus maybe 1" for a special roller board that would clip onto a sys1  to act as an infeed and out feeed