It only took 25+ years to complete.

chrisrosenb

Member
Joined
Sep 1, 2007
Messages
1,265
We started remodeling our kitchen over 25 years ago. We removed the old cabinets & top, gutted it down to the studs, moved wall openings, rewired, new windows, insulated, put up new drywall & floor covering.
Then we temporarily put the old cabinets & tops back until I could get new cabinets built.

Well, life happened & other more important things took priority.

In the last year my wife kept bringing up the new kitchen more often.

I decided that I was going to get the kitchen completed this past winter, I think I am safe in saying this past winter. I hope it is over now.
I decided I was not doing any more paid jobs until our kitchen was finished. I did have to break that pledge to repair some damaged by burst pipes. I did have the new kitchen useable before doing those jobs.

As bad as the winter was, it was great just walking across the driveway to go to work, instead of driving several miles to do who knows what.

I built the cabinets out of cherry lumber that came from a tree that was located about a mile from our current home. The tree was in a town park & was blown down during a storm over 34 years ago.
I was able to buy the tree & have it cut into lumber & kiln dried. The lumber was moved to & from many different locations over the 34+ years since it was cut.

The final layout of the kitchen changed from the original layout. The changes required some additional electrical work.
I did beaded face frames using the Kreg Face Frame Jig.
The counter tops are solid surface, I also fabricated those.  
We also installed new flooring.

I got the dinning room end finished up just before Easter.


















 

 
Nice job, Chris. That's my kind of pace... 25 years.  [big grin] Tell Linda I said hello.

Shane
 
Awesome ... I have at least 6 more years before I need to up my level of effort [cool]
 
Love the cabinets. I'm going to show this post to my wife so she understands it takes time to complete a project.
 
Don T said:
Love the cabinets. I'm going to show this post to my wife so she understands it takes time to complete a project.

That'll kill a tool budget in no time flat!
 
Nice job!  I've only been planning my kitchen upgrade for 20 years, but then, I tell my wife I'm still "tooling up."  [blink]
 
Like the procrastinator said...

I am going to take care of that tomorrow. Just you wait and see.

Nice work by the way.
 
Very nice! What did you use for a finish?
 
Wonderwino said:
Nice job!  I've only been planning my kitchen upgrade for 20 years, but then, I tell my wife I'm still "tooling up."   [blink]

Thanks Alex.

When your wife starts paying for the tools, you better get it done.  [big grin]
 
Nice Job!!
And I thought I was bad doing the 5 year plan for my wife!!!
I gave myself a deadline of this November!!
Actually moving right along, I got the desk area mostly done, and have now moved into the kitchen.
Dang!! Appliances are crazy expensive!!
Here's my progress since January (this year haha)
John
 
Your kitchen looks wonderful.
I have built many kitchens and a wide arrange of media cabinets, bars, entertainment centers and recently finished my first inset job using concealed hinges on straight face frames.
Could you explain to me how you did the beaded frame, I can get the cutters for my moulding machine, but am unsure on how to make the intersections of the stiles and rails work out in a timely fashion?
I would love to do a beaded face frame kitchen.

Josh
 
koschak said:
Your kitchen looks wonderful.
I have built many kitchens and a wide arrange of media cabinets, bars, entertainment centers and recently finished my first inset job using concealed hinges on straight face frames.
Could you explain to me how you did the beaded frame, I can get the cutters for my moulding machine, but am unsure on how to make the intersections of the stiles and rails work out in a timely fashion?
I would love to do a beaded face frame kitchen.

Josh

Kreg Tool makes a setup for making beaded face frames.  Take a look at this video to see how it works.  Pretty clever, I dare say.

 
koschak said:
Your kitchen looks wonderful.
I have built many kitchens and a wide arrange of media cabinets, bars, entertainment centers and recently finished my first inset job using concealed hinges on straight face frames.
Could you explain to me how you did the beaded frame, I can get the cutters for my moulding machine, but am unsure on how to make the intersections of the stiles and rails work out in a timely fashion?
I would love to do a beaded face frame kitchen.

Josh

Thank you Josh.

I been making the beaded face frames for years using several different methods. By far the best & simplest way is the Kreg Face Frame Jig that I currently use & the one that Willy linked to.
Thank you Willy for the link.  They are as easy to do as the video makes it look.

Kreg has 45 degree notching bits for 1/4" bead on 1 1/2" & 2" rails & 3/8" bead on 1 1/2" & 2" rails. These allow for a one pass cut on mid stiles & rails.
The beads can be about any size. The rails can also be any size as long as the notch is wider than the smallest notching bit. For wider mid rail notches, multiple cuts will have to be made.

The video shows making the beaded face frames using Kreg pocket hole joinery. I make my face frames with mortice & tenon joinery.
I just have to allow for the length of the tenon when I set the stop for mitering the rail ends. I also have to allow for the notch when figuring the length of the tenon.

Below is a picture of a couple of practice parts & a picture of the notching bits.

 

Attachments

  • DSCF2538.JPG
    DSCF2538.JPG
    368.2 KB · Views: 200
  • DSCF2539.JPG
    DSCF2539.JPG
    327.7 KB · Views: 192
Back
Top