It's Here! TS 55 REQ is here..... Come play

[Sean7a]

Guys, it's arrived.  Come in to check it out, put in your preorder, make some cuts, get excited about micro adjust-ability knobs, get psyched on cutting really really close to adjacent materials because sometimes we all need to do that.  Be pumped on revamped dust extraction.  Most importantly be thrilled about the "R"

Launch date is May1!

TS 55 REQ @ Festoolproducts.com

 

[Kodi Crescent]

Now that you have your hands on one, please try to calibrate it with a TS 75 on the same rail and report back.

 

[Rick Christopherson]

Now that you have your hands on one, please try to calibrate it with a TS 75 on the same rail and report back.

I thought that the guy who has already had one of these for the past 4 months had already explained this. But maybe I just misread what he wrote?  [blink] [big grin]

 

[Kodi Crescent]

Please be helpful and point me to the post where that is said.  That's much more useful than your implied insult.

 

[peter halle]

Please be helpful and point me to the post where that is said....

I think that this might be the thread:  Can the ts75 and-ts55r be used on the same rail?

Peter

 

[Rick Christopherson]

I am sorry for the misunderstanding. It was meant as a joke because Kodi posted in the thread where this was already explained.

Edited to Add:

Please be helpful and point me to the post where that is said.  That's much more useful than your implied insult.

Kodi, the post in question was literally right above your post in the thread that Peter linked to. I answered the question, Runhard posted with a "thank you" and then your post appeared right after Runhard's. That's why the "Facepalm" was meant to be humorous. Again, I am sorry if you didn't take it that way.