KS120 laser problem

[milz2k3]

Hi guys,

When I first purchased my kapex the lasers came on as soon as I pressed the green button to activate them. Now when I go to use it, I have to slightly move the blade down by pressing the release trigger before I can see the laser on the material I'm cutting.

Anyone had this problem and know how to solve it please?

Thanks

 

[racerv]

The lasers don't come adjusted.  You will have to follow the manual and adjust them yourself using a little allan key.

 

[joiner1970]

It should show as a dotted line until you lower the saw. So yours is showing nothing at all until it's lowered to cut ??

 

[tbellemare]

As joiner said, it should show as a dashed line until the head is lowered. It's dashed because of the gaps in the blade guard. When you lower the head, the blade guard moves out of the way.

Tom

 

[Frank-Jan]

Maybe you just need to clean the plastic dust lense. Check out the supplemental manual page 28 (right before how to adjust the lasers). Link