Latest Woodpeckers Offering...SandStand

[jeffinsgf]

I am surprised they are using red loctite.  Red is usually a more permanent one, and 271 usually requires heat to break the bond-like a blowtorch on it.  Blue is usually used when you may have to take something apart in the future and is more forgiving than red loctite

That's the point. That particular joint is not supposed to come apart. Some of the contributors to this thread are contemplating unauthorized modifications.

 

[rvieceli]

[member=7266]jeffinsgf[/member] sounds like a new YouTube channel in the making.  [tongue]

“unauthorized modifications to Woodpecker’s products”

[member=44099]Cheese[/member] how long before it goes subscription only?  [big grin]

Ron

 

[jeffinsgf]

[member=7266]jeffinsgf[/member] sounds like a new YouTube channel in the making.  [tongue]

“unauthorized modifications to Woodpecker’s products”

[member=44099]Cheese[/member] how long before it goes subscription only?  [big grin]

Ron

Or we could go Milennial on the name and make it a mash-up. UnaMods.

 

[Cheese]

Just used the ETSC/SandStand yesterday to remove circuit board flash from some LED lights that are being installed in stainless housings for outdoor steplights. Once the flash was removed, the OD also needed to be pared down slightly to fit into the existing housings.

A pretty simple process and certainly 10x safer than performing the same operation on my Jet 12" disc sander. This method really saved my finger tips because I made contact with the disc 10-12 times.

[attachimg=1]

[attachimg=2]

[attachimg=3]

 

[Ultimate Tools Marketing]

[member=44099]Cheese[/member] For a second, I thought you had mounted the LEDs under the pad of your sander!