WestMan_Canada
Member
- Joined
- May 9, 2020
- Messages
- 57
Lee Valley Item 16F0210 Hold-Down Clamps,
I have a total of 12 of these for sale; very light use most have never been used.
The posts are just shy of 3/4" in diameter; The lower retainer nut is "dome" shaped (see diagram in photos) that allows them to self center in dog holes 3/4" or greater. I have used these successfully in my Festool MFT (20mm holes)
$3.75US ($5Cdn) each (minimum quantity of 4) or $38US ($49Cdn) for all 12
Will ship anywhere in Canada or US – PM to discuss shipping method / cost.
These glass-filled nylon hold-down clamps are versatile and economical.
Hold-down capacity is about 3 1/2", less the worktop thickness. The quick-release nut slides freely for fast adjustment, with clamping pressure applied using the red cam lever.
The lever arm is serrated to prevent slipping. The clamps can also be used as dogs or stops.
I have a total of 12 of these for sale; very light use most have never been used.
The posts are just shy of 3/4" in diameter; The lower retainer nut is "dome" shaped (see diagram in photos) that allows them to self center in dog holes 3/4" or greater. I have used these successfully in my Festool MFT (20mm holes)
$3.75US ($5Cdn) each (minimum quantity of 4) or $38US ($49Cdn) for all 12
Will ship anywhere in Canada or US – PM to discuss shipping method / cost.
These glass-filled nylon hold-down clamps are versatile and economical.
Hold-down capacity is about 3 1/2", less the worktop thickness. The quick-release nut slides freely for fast adjustment, with clamping pressure applied using the red cam lever.
The lever arm is serrated to prevent slipping. The clamps can also be used as dogs or stops.
