Mike Goetzke
Member
- Joined
- Jul 12, 2008
- Messages
- 1,134
My Makita track saw is what pulled me to the FOG from my former Eurekazone tools/forum. I know there are at least a few others with this saw and thought I'd share this. If you put a 1mm and 0.1mm spacers on the arbor you can fit a 5/8" arbor Freud blade on the 20mm arbor.
This does throw off the blade to anti-chip distance. I'm wondering if I could buy a spare arbor adapter from Makita and sand/file 1.1mm off.
Mike
This does throw off the blade to anti-chip distance. I'm wondering if I could buy a spare arbor adapter from Makita and sand/file 1.1mm off.
Mike