- Joined
- Sep 22, 2007
- Messages
- 636
Hopefully most of you are familiar with the storage bins that McFeely's sells with their screw assortments. Did you know they fit nicely on the MFT? The bins have a lip on the back side that fits the groove on the MFT extrusions. I've tried this on an MFT-1080 but see no reason it wouldn't work on the MFT/3 also.
[attachimg=1]
So now you can bring your screws to the bench and have a spot to put them. Better yet, the bins can be used for storing other things, like bench dogs. [wink]
I found an ideal for the bin is right up front under the guide rail (oops - it won't go there if you're using the normal Festool rail clamps).
[attachimg=2]
It also works with 15 or 40 series extrusions from 80/20 Inc. [smile]
[attachimg=1]
So now you can bring your screws to the bench and have a spot to put them. Better yet, the bins can be used for storing other things, like bench dogs. [wink]
I found an ideal for the bin is right up front under the guide rail (oops - it won't go there if you're using the normal Festool rail clamps).
[attachimg=2]
It also works with 15 or 40 series extrusions from 80/20 Inc. [smile]
