Measurements of the boxes the CT26 and Midi are packaged in

[jparker]

I know this is an odd question but does anyone happen to know the measurements of the boxes the CT26 and Midi come in from Festool?  I am planning on buying one of the two locally as a gift and need to make sure that I have room to transport it without taking it out of the box.  I am waiting to hear back from local dealer so I thought I would reach out here in case anyone happened to know off hand or had a box to measure.

Thanks

 

[copcarcollector]

[member=62865]jparker[/member]

CT26 is 15.5 x 23.5 x 26 inches.

Note, this is an older model I have had for a couple of years, so the size may have changed but I doubt it...

 

[Mario Turcot]

CT26 is 15.5 x 23.5 x 26 inches.

Note, this is an older model I have had for a couple of years, so the size may have changed but I doubt it...

Confirmed... acquired November 2017

Mario

 

[c_dwyer]

[member=62865]jparker[/member]

The Midi box is 13.5" x 17.5" x 22" high

 

[RustE]

[member=62865]jparker[/member]

The Midi box is 13.5" x 17.5" x 22" high

I came up with 13.25 x 17.5 x 22

We’re close enough for the OP’s purpose.

 

[c_dwyer]

Thank you for the check [member=63201]RustE[/member] , the box was tucked in the back corner of the basement shop and I ended up having plenty of twisting and turning to do to get at it. So, I must have gone 0.25" more due to all my shaking.  A rail-guide box cutter could be the fix for trimming it back to specs. Slap on a bluetooth battery for kicks and a remote starter.

 

[jparker]

I appreciate everyone for taking the time to provide the measurements.

Thanks

 

[ColossusX]

Big help for me too, thanks.  Building shelving for my van and want to reserve a spot for either CT without having to rebuild