Measurements on Kapex Crown extensions

[ear3]

Trying to decide on whether to get some of the Kapex crown extensions for use when the saw will be mounted on the cart I'm making, and so for design/planning purposes, I was wondering if someone could give me some measurements -- that is, how much extra bed do each of the extensions provide, both depth and width (and for width: on its own, or as measured from the blade).  Thanks.

 

[copcarcollector]

I hope these help. I noticed when I was done that the extensions are cut at two different angles where it meets the saw base, so I added pictures on both sides of the saw so you can see that as well. If you need additional photos or dimensions, let me know!

[attachimg=1]

[attachimg=2]

[attachimg=3]

[attachimg=4]

[attachimg=5]

[attachimg=6]

[attachimg=7]

 

[ear3]

[member=18038]copcarcollector[/member] Perfect!  Thanks a bunch!

I hope these help. I noticed when I was done that the extensions are cut at two different angles where it meets the saw base, so I added pictures on both sides of the saw so you can see that as well. If you need additional photos or dimensions, let me know!

[attachimg=1]

[attachimg=2]

[attachimg=3]

[attachimg=4]

[attachimg=5]

[attachimg=6]

[attachimg=7]

 

[copcarcollector]

You bet. Also remember, you cant use the crown extensions and the UG extensions at the same time. Weird oversight on Festools part...