Alex.Koegel
Member
- Joined
- Jan 29, 2015
- Messages
- 4
Enjoy !
Look at near and above the Milling Head black brushes. There was there certainly a hugh hose with a very effective collection. However, there was still some noticeable dose of dust thrown aside.hrrb said:[welcome]
Lots of dust made during the proces...no dust collection built in the CNC cutter (or they forgot to turn it on)...no mask...just blowing the dust all over!
As I've mentioned below the clip, the whole job (3 identical pieces) cost was $110. I had the choice of either making 1 for $70, or 3 for $110 (made from the same 122cm * 244cm plate). I think this is cheap.rst said:Certainly the easiest but that is a $200,000 plus router...certainly not the cheapest.