Woodwork Wizard
Member
- Joined
- Oct 25, 2013
- Messages
- 431
I have posted about this before but there's another good use for the top of this drawer - you can write on paper and not go through a 20mm hole every 96mm so I think this merits a new post as it is an additional enhancement.
I often keep the cutting plan on it. It keeps all the dust out and lots of clamps in. I reckon you could easily get 30 clamps in it as it is as big as I could make it be. Both the Festool screw and the squeeze clamps can be used in the MFT/3 holes above the drawer. It's in a space that would normally not be used for anything and cost very little to make.
I often keep the cutting plan on it. It keeps all the dust out and lots of clamps in. I reckon you could easily get 30 clamps in it as it is as big as I could make it be. Both the Festool screw and the squeeze clamps can be used in the MFT/3 holes above the drawer. It's in a space that would normally not be used for anything and cost very little to make.