Greg in Caledon Canada
Member
- Joined
- Nov 2, 2011
- Messages
- 8
Hello all, I thought I would post pics of my MFT table cabinet. I kept mine very simple. The goal was to have a place to stash the systainers, have it roll around, and make the space underneath the table more useful. Also took into account a place to locate a vacuum, quick clamp usage, some drawers to hold accessories and the ability to simply lift off, re-attach legs and go (about 5 min once you have done it a few times). Here is my final solution.
It is open on both sides except for behind the drawers so you can have systainers on both sides. It simply sits snugly on top on the interior corner bracing of the 4 corner brackets. I have pushed and pulled and it does not "pop" off. It rolls around on 5 castors. The corner castors also lock. The space between the cabinet and the top serves as a handy place to put your work pieces as you work.
It is open on both sides except for behind the drawers so you can have systainers on both sides. It simply sits snugly on top on the interior corner bracing of the 4 corner brackets. I have pushed and pulled and it does not "pop" off. It rolls around on 5 castors. The corner castors also lock. The space between the cabinet and the top serves as a handy place to put your work pieces as you work.
