https://benchworks.be/en/plans/bgymr said:
MFTC portable workshop
- Thread starter Timtool
- Start date
Thanks Bernmc. I already purchased it. But it was sent in metric units, and I need English. I don't have many metric measuring devices, which would add a lot of math to my build. I'm hoping to avoid that. Can someone send me the English copy please? I can send you a proof of my purchase before.
rubber_ducky
Member
- Joined
- Jan 14, 2017
- Messages
- 73
From the MFTC description page:
“Available in metric or in a version adapted for the US market where the sheet goods are in imperial thickness, but the remaining measures are in metric.”
...seems that there isn’t a version that is entirely imperial.
Sent from my iPhone using Tapatalk
“Available in metric or in a version adapted for the US market where the sheet goods are in imperial thickness, but the remaining measures are in metric.”
...seems that there isn’t a version that is entirely imperial.
Sent from my iPhone using Tapatalk
RJNeal
Member
- Joined
- Mar 7, 2008
- Messages
- 659
I also purchased the package of plans.
First off I’m not all that much of a computer person. And I’m only working off a iPad
I downloaded them to my pages app.
Looked at them a few times. So I hit my download limit and when I try to view them in pages they are all zipped up.
Can some one please help me or even better print them out for me and mail them to me. I will pay for them. I have lots of Festool but not even a printed.
I can show a receipt
Thanks
Rick
First off I’m not all that much of a computer person. And I’m only working off a iPad
I downloaded them to my pages app.
Looked at them a few times. So I hit my download limit and when I try to view them in pages they are all zipped up.
Can some one please help me or even better print them out for me and mail them to me. I will pay for them. I have lots of Festool but not even a printed.
I can show a receipt
Thanks
Rick
Try using an app that can process archived files and you should be able to unzip the files on your iPad and view them in their original format.RJNeal said:
I personally use one called Documents (free version) and I’m sure there’s plenty other ones out there.
Sent from my iPhone using Tapatalk
The table is half inch ply then 3/4 on the inside around the perimeter. Standard track is 1/2" deep so it would cut the 1/2 ply. I should have glued both together then done the dado. I found some 3/8 deep track, but they did some weird stuff where it doesn't fit my clamps.
Here is my setup.
https://drive.google.com/file/d/17aJ6i9ZPFcJQeFjWeybfl1vQuRU8OSFy/view?usp=sharing
Here is my setup.
https://drive.google.com/file/d/17aJ6i9ZPFcJQeFjWeybfl1vQuRU8OSFy/view?usp=sharing
Gday MFTC gurus,
Would anyone have a way to contact Tim?
I purchased the plans a couple of days ago and when I received the email with the link I downloaded the zip file.
But when I attempt to open it winrar give an error and said the zip was corrupted.
So I downloaded again, and again, corrupted.
I tried another pc and had the same result. Now I’m getting the message “ Sorry but you have hit your download limit for this file.”
I emailed Tim but he must be busy on the farm.
Can anyone help me contact Tim?
Would anyone have a way to contact Tim?
I purchased the plans a couple of days ago and when I received the email with the link I downloaded the zip file.
But when I attempt to open it winrar give an error and said the zip was corrupted.
So I downloaded again, and again, corrupted.
I tried another pc and had the same result. Now I’m getting the message “ Sorry but you have hit your download limit for this file.”
I emailed Tim but he must be busy on the farm.
Can anyone help me contact Tim?
Thanks Jasen , I did try 7zip today and I could see that there were 2 files inside. A PDF and a jpg.jasen said:
I was able to extract the jpg which was the template for the cutout at the bottom but the PDF would not extract and gave an error. I did notice that the 3 copies of the zip file were all different sizes and the one I was able to get the jpg extract from was the biggest at 2.9mb. If someone could even tell me what size the zip file is. When I downloaded the zip file chrome would not tell me what size the file was been downloaded.
I will try emailing Tim again, I hope he checks his emails regularly as I really love to start building the MFTC this weekend. Thanks in advance.
weekendwarrior
Member
- Joined
- Feb 16, 2014
- Messages
- 181
I've been wanting to purchase the combo pack for a while and this thread revival reminded me.
It could easily have been a stupid move considering it reportedly didn't work recently, but I just purchased the USA version and all the files opened successfully on my computer.
I used 7-Zip to unzip the files and used Adobe Reader to open the PDF files. It works just fine for me!
It could easily have been a stupid move considering it reportedly didn't work recently, but I just purchased the USA version and all the files opened successfully on my computer.
I used 7-Zip to unzip the files and used Adobe Reader to open the PDF files. It works just fine for me!
Thanks doug H, no sketchup file which means the download was incomplete for some reason!doug H said:
I just have to be a patient am hope Tim looks at he emails soon.
Looking forward to using my new TS55 and the parf guide v2 on the build which I got for my birthday. [big grin]
Thanks again
G'Day Guys,
I sent Tim 3 emails about still have not received a reply.
So I just paid for the plans again and this time they downloaded without issue.
The Zip file is 4.9mb and has 3 files, PDF , JPG and the sketchup file. just for anyone who needs it
The first time I tried to download the zip at work, so my work firewall/antivirus must have done something.
Thanks to everyone who replied.
I sent Tim 3 emails about still have not received a reply.
So I just paid for the plans again and this time they downloaded without issue.
The Zip file is 4.9mb and has 3 files, PDF , JPG and the sketchup file. just for anyone who needs it
The first time I tried to download the zip at work, so my work firewall/antivirus must have done something.
Thanks to everyone who replied.
Hello friends,
I have tried to reach timothy many times in the last month. I've sent money for metric plans and got an email which I found too late in my spam folder, so that the link was expired. Nevertheless I payed again for the plans, hoping he looks at his PP account.
Anybody an idea to get in contact with him or how to get the plans ?
Thx
Jochen
I have tried to reach timothy many times in the last month. I've sent money for metric plans and got an email which I found too late in my spam folder, so that the link was expired. Nevertheless I payed again for the plans, hoping he looks at his PP account.
Anybody an idea to get in contact with him or how to get the plans ?
Thx
Jochen
gunnyr
Member
- Joined
- Nov 13, 2014
- Messages
- 387
Michel said:
The cart as designed by Timothy is 1263mm. I needed mine to be a little shorter to fit in my truck so I modified the pivot point. You can see pics in my post: Gunnyr MFTC My cart is reduced to a height of 1215mm it fit upright in my Silverado with a mid-height ARE Commercial Cap. You could also use smaller wheels to further reduce the height if needed, or possibly make the top totally removeable.