[attachimg=#][attachimg=#][attachthumb=#][attachimg=#][attachimg=#][attachimg=#][attachimg=#]
My first wooden inlay for a photo fame project; Tools used1. Router FS2000 mounted on the CMS/INCRA JIG SUPER SYSTEM incorporated bench to size, route the shape of the frames, the MFT table/ TS 75 to cut square tiles at the end corners and a band saw to cut the shapes of the inlays. Quite a lengthy process but end result quite satisfying. Next time will try to replace the end corners by small pyramids.
NAUSHAD BUROKUR
My first wooden inlay for a photo fame project; Tools used1. Router FS2000 mounted on the CMS/INCRA JIG SUPER SYSTEM incorporated bench to size, route the shape of the frames, the MFT table/ TS 75 to cut square tiles at the end corners and a band saw to cut the shapes of the inlays. Quite a lengthy process but end result quite satisfying. Next time will try to replace the end corners by small pyramids.
NAUSHAD BUROKUR
