My MFT design and build walk-through

[Dusty.House]

[attachimg=1]

Hey All, I just wanted to share a point let to my MFT build write up:
https://toolguyd.com/diy-mft-workbench-part-1-design-goals-frame-construction/

This is the first in 3-4 blogs I'm going to do walking through my design and build.

My daughter (7) and I also did a COVD home school project and created a couple of stop motion videos, starting with the frame assembly:


Thanks for all the inspiration.

Ben

 

[Brian Puccio]

This is really well done: both the project and your documentation. Thanks for sharing!

 

[Dusty.House]

This is really well done: both the project and your documentation. Thanks for sharing!

Thanks

the project is the easy part, writing it up is hard!

Sent from my iPhone using Tapatalk

 

[TSO_Products]

Hey, DustyTools - now there's a bit of jazzy documentation to intimidate the rest of us.
But that's OK - just keep building and posting.

Some of it might actually rub off on me - hope springs eternal  [wink]
Hans