NAINA
- Thread starter ceddy
- Start date
copcarcollector
Member
- Joined
- Jan 11, 2013
- Messages
- 1,454
I think it has been discussed before, but you might want to call ahead and make sure that the specific dealer has what you want on hand, particularly the CMS module(s), or make sure they can get it for you and have it ready once you arrive...
sancho57
Member
- Joined
- Jan 13, 2011
- Messages
- 7,089
Lets see, the CMS Modules and Domino connectors were mentioned,
The jigsaw module is pretty kool, I got one, make sure you get the right one for you jigsaw.
The CS 50 fence for the Saw and CMS extension table would be nice to , I recommend the one with the legs. It will expand the cutting capacity of the saw to something like 24".
Toolies, festool swiss army knifes are nice to. The belt sander though pricey and its only 240V would be something I consider.
If you can find one, there was a limited edition installers set for timber framing. It is real nice, I got one. It has a socket set , for driving lag bolts etc.. It has a nice festool tape measure , haven't seen one like along with a beautiful knife only time i seen one like it, folding rule. A Awesome set of forester bits and auger bits.
Now Im no timber framer, but if someone was into outside projects (building gates, fences, A/C compressor covers, gazebos Etc) this is the kit for you. I got a couple of gates to build when I return to the states. This kit will make my life a whole lot easier.
Plus Im moving when I get back after I find a place to retire at, Ill be busy building a lot of outdoor projects.
As I said it was limited addition I bought it last year in Oct. at a tool show.
You might just be able to find one of the dealers in Berlin might be able to locate one for you. Oh as far as connectors there are 4 different p/n. They come in sets. They are not cheap, but I would get a couple of the sets each p/ns as I don't know if or when they will be released in the states. They do look nice.
Wish I could use them with my 500.
The jigsaw module is pretty kool, I got one, make sure you get the right one for you jigsaw.
The CS 50 fence for the Saw and CMS extension table would be nice to , I recommend the one with the legs. It will expand the cutting capacity of the saw to something like 24".
Toolies, festool swiss army knifes are nice to. The belt sander though pricey and its only 240V would be something I consider.
If you can find one, there was a limited edition installers set for timber framing. It is real nice, I got one. It has a socket set , for driving lag bolts etc.. It has a nice festool tape measure , haven't seen one like along with a beautiful knife only time i seen one like it, folding rule. A Awesome set of forester bits and auger bits.
Now Im no timber framer, but if someone was into outside projects (building gates, fences, A/C compressor covers, gazebos Etc) this is the kit for you. I got a couple of gates to build when I return to the states. This kit will make my life a whole lot easier.
Plus Im moving when I get back after I find a place to retire at, Ill be busy building a lot of outdoor projects.
As I said it was limited addition I bought it last year in Oct. at a tool show.
You might just be able to find one of the dealers in Berlin might be able to locate one for you. Oh as far as connectors there are 4 different p/n. They come in sets. They are not cheap, but I would get a couple of the sets each p/ns as I don't know if or when they will be released in the states. They do look nice.
Wish I could use them with my 500.
ear3
Member
The Domino XL connectors. EDIT: And the suction reducing adapter for using the smaller sanders like the DTS or RTS with the CT.
