Need help with ideas on a storage system for my compressor

[dinkjs]

I have a Bostitch Pancake compressor and I am looking for ideas on how to get this thing mobile but it must be able to hold my two guns Brad and Finish Nailer and eventually Pin Nailer.  There is a kind of a stickler here.  Out of the air line I have a 4 inch pipe and attached to that is a small filter then I run the air hose.  I really would like to get this thing on rollers.  Do you guys have any suggestions for this?  It stays in my shop, but I take it into my house for doing baseboards and such.  Any ideas?  I am truly blocked on ideas on how to tackle this.

 

[semenza]

How about building a dolly with some sturdy uprights to hang the guns and hose on?  Do you need to carry it up any stairs? Maybe some lifting handles?  Or a really long hose for i nthe house.

Seth

 

[dinkjs]

As of now no stairs but that might change when we move up to Indiana this year.  As for a dolly setup would you go with a larger tire set?

 

[rmwarren]

If you are just using it in the house for occasional nailing rather than lug it around you might consider just buying the Senco PC1010.

$120 from Amazon, add a recoil air hose and you just carry it up to whatever you are working on.

RMW

 

[mastercabman]

Why not just get more hoses and leave the compressor in the shop?

 

[nclemmons]

Have you considered something like this if you are only doing an occasional project in your home?  I have one and it's really handy.  Uses CO2 paintball cartridges which are refillable at most sporting goods stores.

http://www.lowes.com/ProductDisplay?partNumber=166441-61735-J-6901-100&langId=-1&storeId=10151&productId=1040295&catalogId=10051&cmRelshp=rel&rel=nofollow&cId=PDIO1

 

[PA floor guy]

What am I missing here.  A pancake compressor is already mobile.  They don't weigh that awful much. Just pick it up and carry it where you want it.  Or get yourself a few paslode guns, you will never look back. 

 

[JeromeM]

Have you considered something like this if you are only doing an occasional project in your home?  I have one and it's really handy.  Uses CO2 paintball cartridges which are refillable at most sporting goods stores.

http://www.lowes.com/ProductDisplay?partNumber=166441-61735-J-6901-100&langId=-1&storeId=10151&productId=1040295&catalogId=10051&cmRelshp=rel&rel=nofollow&cId=PDIO1

lowes have found a way to loose custom. I went to your link and all I got was this
[attachimg=#]

A perfect fail ???

 

[nclemmons]

here's one on eBay...

http://www.ebay.com/itm/JacPac-CO2-Regulator-Kit-/170987095083?

Hopefully no line forming there!

neil

 

[semenza]

JacPac is the maker of the Lowes/Kobalt one.

Seth