New Centrotec Accessories and Granat Paper for RS2E

[Peter James]

Hey guys, Festool just released some new Centrotec accessories and sandpaper...

1) 495228 Centrotec Hand Driver - Turns your Centrotec bits and chuck into a handheld screwdriver. Made famous by the 498796 98 piece kit. $25.00

2) 495130 Stubby Centrotec Brad Point Bit Set. 5 piece set from 3-8mm. $40.00

3) 495131 Centrotec 1/4" Socket Adapter - use 1/4" drive sockets on your Festool drill or 495228. $20.00

4) 495133 Centrotec 3/8" Socket Adapter - use 1/4" drive sockets on your Festool drill or 495228. $25.00

5) 496450 Centrotec Adapter for non Festool Drills - allows any drill to accept a Centrotec chuck and bits now. $20.00

6) 493309 3/16" Slotted Bit Tips - 10 Pack. $10.00

7) 493310 7/32" Slotted Bit Tips - 10 Pack. $10.00

8) 493311 1/4" Slotted Bit Tips - 10 Pack. $10.00

9) 492537 Centrotec 7/32" Slotted Bits - 2 Pack. $18.00

10) 492538 Centrotec 1/4" Slotted Bits - 2 Pack. $18.00

11) 498944 40 Grit Granat 1/2 Sheet Sandpaper 50 pack. $38.00

12) 498945 60 Grit Granat 1/2 Sheet Sandpaper 50 pack. $38.00

13) 498946 80 Grit Granat 1/2 Sheet Sandpaper 100 pack. $38.00

14) 498947 120 Grit Granat 1/2 Sheet Sandpaper 100 pack. $55.00

15) 498948 150 Grit Granat 1/2 Sheet Sandpaper 100 pack. $55.00

16) 498949 180 Grit Granat 1/2 Sheet Sandpaper 100 pack. $55.00

17) 498950 220 Grit Granat 1/2 Sheet Sandpaper 100 pack. $55.00

18) 498951 240 Grit Granat 1/2 Sheet Sandpaper 100 pack. $55.00

19) 498952 280 Grit Granat 1/2 Sheet Sandpaper 100 pack. $55.00

20) 498953 320 Grit Granat 1/2 Sheet Sandpaper 100 pack. $55.00

21) 498954 400 Grit Granat 1/2 Sheet Sandpaper 100 pack. $55.00

I'm sure will put these up on www.festoolproducts.com later - Just wanted to give you all a heads up.

Edited 04/28/12 @ 11:15 am to correct number the bit set - it's a five piece set - sorry guys!

 

[builderbob]

Totally thrilled about the Centrotec stuff!!!

Now all those boys can adapt their sockets!!!

Bob

 

[Peter James]

Totally thrilled about the Centrotec stuff!!!

Now all those boys can adapt their sockets!!!

Bob

Yes!!! Now we need green Festool sockets......

 

[Wood_Junkie]

Hey guys, Festool just released some new Centrotec accessories and sandpaper...

2) 495130 Stubby Centrotec Brad Point Bit Set. 8 piece set from 3-8mm. $40.00

HOOORRRAAAY!  I love these.. They're my most-used drill bits and I was just thinking I need to order some backups from over the pond.

 

[Peter James]

Hey guys, Festool just released some new Centrotec accessories and sandpaper...

2) 495130 Stubby Centrotec Brad Point Bit Set. 8 piece set from 3-8mm. $40.00

HOOORRRAAAY!   I love these.. They're my most-used drill bits and I was just thinking I need to order some backups from over the pond.

Awesome - good timing then! I'm pretty pumped about the 495228 since I missed out on this in the centrotec 98 piece set!

 

[builderbob]

Hey guys, Festool just released some new Centrotec accessories and sandpaper...

2) 495130 Stubby Centrotec Brad Point Bit Set. 8 piece set from 3-8mm. $40.00

HOOORRRAAAY!  I love these.. They're my most-used drill bits and I was just thinking I need to order some backups from over the pond.

Awesome - good timing then! I'm pretty pumped about the 495228 since I missed out on this in the centrotec 98 piece set!

That is the only item I wanted from the installers kit!

I've been quite patient!

Bob

 

[ericbuggeln]

Peter, we spoke on the phone a few days ago, bob plunskes best friend. Bob has the screwdriver and so I must have one. Are they ready for immediate shipment? Eric

 

[Peter James]

Hey guys, Festool just released some new Centrotec accessories and sandpaper...

2) 495130 Stubby Centrotec Brad Point Bit Set. 8 piece set from 3-8mm. $40.00

HOOORRRAAAY!  I love these.. They're my most-used drill bits and I was just thinking I need to order some backups from over the pond.

Awesome - good timing then! I'm pretty pumped about the 495228 since I missed out on this in the centrotec 98 piece set!

That is the only item I wanted from the installers kit!

I've been quite patient!

Bob

You and me both!!!

---
I am here:http://tapatalk.com/map.php?vqph5c

 

[Peter James]

Peter, we spoke on the phone a few days ago, bob plunskes best friend. Bob has the screwdriver and so I must have one. Are they ready for immediate shipment? Eric

We don't have them in stock yet but I can ask Festool I ship direct if you'd like

---
I am here:http://tapatalk.com/map.php?jou2ct

 

[EWTHeckman]

13) 498946 80 Grit Granat 1/2 Sheet Sandpaper 100 pack. $38.00

14) 498947 120 Grit Granat 1/2 Sheet Sandpaper 100 pack. $55.00

15) 498948 150 Grit Granat 1/2 Sheet Sandpaper 100 pack. $55.00

16) 498949 180 Grit Granat 1/2 Sheet Sandpaper 100 pack. $55.00

17) 498950 220 Grit Granat 1/2 Sheet Sandpaper 100 pack. $55.00

18) 498951 240 Grit Granat 1/2 Sheet Sandpaper 100 pack. $55.00

19) 498952 280 Grit Granat 1/2 Sheet Sandpaper 100 pack. $55.00

20) 498953 320 Grit Granat 1/2 Sheet Sandpaper 100 pack. $55.00

21) 498954 400 Grit Granat 1/2 Sheet Sandpaper 100 pack. $55.00

100 packs!?!?!?  [eek]  [scared]  [jawdrop] [censored]

 

[Peter James]

13) 498946 80 Grit Granat 1/2 Sheet Sandpaper 100 pack. $38.00

14) 498947 120 Grit Granat 1/2 Sheet Sandpaper 100 pack. $55.00

15) 498948 150 Grit Granat 1/2 Sheet Sandpaper 100 pack. $55.00

16) 498949 180 Grit Granat 1/2 Sheet Sandpaper 100 pack. $55.00

17) 498950 220 Grit Granat 1/2 Sheet Sandpaper 100 pack. $55.00

18) 498951 240 Grit Granat 1/2 Sheet Sandpaper 100 pack. $55.00

19) 498952 280 Grit Granat 1/2 Sheet Sandpaper 100 pack. $55.00

20) 498953 320 Grit Granat 1/2 Sheet Sandpaper 100 pack. $55.00

21) 498954 400 Grit Granat 1/2 Sheet Sandpaper 100 pack. $55.00

100 packs!?!?!?  [eek]  [scared]  [jawdrop] [censored]

You'll never have to wait for Granat paper again for your RS2E if you think about it.....

---
I am here:http://tapatalk.com/map.php?k14rsf

 

[EWTHeckman]

You'll never have to wait for Granat paper again for your RS2E if you think about it.....

True. Neither will my grandchildren.

For a DIYer like me, this is total overkill. A 25 sheet pack would still be a lot for me, but much more reasonable. I was expecting 10 sheet packs like for the Rubin.

 

[Peter James]

You'll never have to wait for Granat paper again for your RS2E if you think about it.....

True. Neither will my grandchildren.

For a DIYer like me, this is total overkill. A 25 sheet pack would still be a lot for me, but much more reasonable. I was expecting 10 sheet packs like for the Rubin.

Completely understand. If anything changes - you can bet I'll let you know.

 

[builderbob]

@Heckman,

You should see if any other foggers are interested in splitting an assorted number of grits...that would certainly make it more affordable...the shipping would be free to one person and split up the packs and ship away, split the shipping... Done deal!  Just a thought!

Bob

 

[Peter James]

@Heckman,

You should see if any other foggers are interested in splitting an assorted number of grits...that would certainly make it more affordable...the shipping would be free to one person and split up the packs and ship away, split the shipping... Done deal!  Just a thought!

Bob

I'll do you one better - as long as we can get enough FOG'ers to take the 50/100 per grit I'll split them up and ship USPS flat rate envelope...Just a thought....That would be the least expensive shipping charge I believe. It will keep the quantities down and the shipping cost to you guys at a minimum. Obviously, it may take a little while longer because I'll have to order it in from Festool and not drop ship it, but it's just a thought. Please let me know if I can help facilitate that for you all!

 

[builderbob]

Good call Peter!!!

Bob

 

[Peter James]

Whatever we can do to help! We're happy to split shipments to whomever pays says it should go. We'll get the buyer and receiver tracking info as well. Hope this helps soften the blow a bit....

 

[EWTHeckman]

I'll do you one better - as long as we can get enough FOG'ers to take the 50/100 per grit I'll split them up and ship USPS flat rate envelope...Just a thought....That would be the least expensive shipping charge I believe. It will keep the quantities down and the shipping cost to you guys at a minimum. Obviously, it may take a little while longer because I'll have to order it in from Festool and not drop ship it, but it's just a thought. Please let me know if I can help facilitate that for you all!

That's great, Peter! I guess I'll start.

For my current project, I only need 80 and 120 grits. (I'm planning to use the RO 125 for finer work.) I would consider 180 and 220 grits too if that's necessary. Preferred quantity: 10 each. 20 or 25 each would be okay too.

What do you say, guys? Anyone else willing to split some packs?

 

[Peter James]

I'll do you one better - as long as we can get enough FOG'ers to take the 50/100 per grit I'll split them up and ship USPS flat rate envelope...Just a thought....That would be the least expensive shipping charge I believe. It will keep the quantities down and the shipping cost to you guys at a minimum. Obviously, it may take a little while longer because I'll have to order it in from Festool and not drop ship it, but it's just a thought. Please let me know if I can help facilitate that for you all!

That's great, Peter! I guess I'll start.

For my current project, I only need 80 and 120 grits. (I'm planning to use the RO 125 for finer work.) I would consider 180 and 220 grits too if that's necessary. Preferred quantity: 10 each. 20 or 25 each would be okay too.

What do you say, guys? Anyone else willing to split some packs?

Ed, thanks! Let's hope we can get others on board with this. I'll make a spreadsheet showing who wants what grit and quantities to keep things easy for tracking. I'll be on the lookout for others, either posting here, by a pm, or by email. Thanks guys!

 

[Peter James]

Peter, we spoke on the phone a few days ago, bob plunskes best friend. Bob has the screwdriver and so I must have one. Are they ready for immediate shipment? Eric

Eric, thanks for the order, and it was good to catch up a bit this morning. Let me know when you're coming by - I want to make sure I'm here to shake your hand! I just received the order confirmation from Festool this morning and it looks like it's ready to ship. I'll email tracking info when Festool gets it out the door!