New Festool Stuff discovered !
- Thread starter guybo
- Start date
squall_line
Member
That new "slotted" rail was in the background/hero shots for the new OF 1010. Now the slot makes a lot more sense.
DynaGlide
Member
- Joined
- May 16, 2017
- Messages
- 1,697
If you go here and search by novelty you can see everything with descriptions
=1;]https://www.naradionline.cz/elektricke-naradi/rezani/prislusenstvi/?f[novinka]=1;
The slots on the new rails let you hang them on adhesive clips on the wall or transport over a systainer handle.
There's new self aligning guide rail connectors, a new guide rail angle attachment as well.
=1;]https://www.naradionline.cz/elektricke-naradi/rezani/prislusenstvi/?f[novinka]=1;
The slots on the new rails let you hang them on adhesive clips on the wall or transport over a systainer handle.
There's new self aligning guide rail connectors, a new guide rail angle attachment as well.
Cheese
Member
Michael Kellough
Member
Looks like those new rail connectors would do the job.
What are the green inserts for (for use in the new guide rails)?
What are the green inserts for (for use in the new guide rails)?
Cheese
Member
Also new:
clamping systainer
View attachment 1
phone charger
View attachment 2
View attachment 3
wpz
clamping systainer
View attachment 1
phone charger
View attachment 2
View attachment 3
wpz
Attachments
Nice discoveries guybo and wpz ! [thumbs up]
Seth
Seth
I don't see the new clamping Systainer there, but it looks like a variant from the previous #201311
New guiderail accesory kit with the new connectors and the FS-WA in #577157, but still the screw clamps. [sad]
And it comes in a fatter Systainer. How much air can they possible fit in there... [huh]
I wonder how it looks inside. Tempted to buy it, sell off the empty space waster and transfer it over to a Systainer I T-Loc if possible.
New guiderail accesory kit with the new connectors and the FS-WA in #577157, but still the screw clamps. [sad]
And it comes in a fatter Systainer. How much air can they possible fit in there... [huh]
I wonder how it looks inside. Tempted to buy it, sell off the empty space waster and transfer it over to a Systainer I T-Loc if possible.
Michael Kellough
Member
Cheese said:
So, you don’t know either? [huh]
squall_line
Member
Coen said:
The picture of the FS-WA appears to have detents at 30, 45, and 60.
Michael Kellough said:
Not sure what you mean by that. He posted a picture in response to the question. The picture shows the green clips being used to hang the rails on a wall.
Michael Kellough
Member
Aha!
The photo could have used a little more depth of field.
It looked to me like a sideways photo of a guide rail sitting on particle board.
The photo could have used a little more depth of field.
It looked to me like a sideways photo of a guide rail sitting on particle board.
They are self stick, but I wonder if you can use them only once to temporarely fix the rail or if you can also use them to hang the rail on the wall and take it on and off.
wpz
View attachment 1
wpz
View attachment 1
Attachments
Attachments
mino
Member
Nice to see the TSO cooperation bear some fruit!
EDIT:
Interesting that the new self-aligning guide rail connectors are different each.
Only one of them is self-aligning while the other one is "traditional". This matches with the observation that the "ribs" are not guaranteed to be same distance, so only one should be used for (self) alignment.
Edit:
Took some time, but looks someone finally listened - a hose guide compatible with FS/2!
FS/2-AW - part 204787:
EDIT:
Interesting that the new self-aligning guide rail connectors are different each.
Only one of them is self-aligning while the other one is "traditional". This matches with the observation that the "ribs" are not guaranteed to be same distance, so only one should be used for (self) alignment.
Edit:
Took some time, but looks someone finally listened - a hose guide compatible with FS/2!
FS/2-AW - part 204787:
