New sweepstakes: Win a 90th Anniversary CXS drill! (US and Canada)

[jdm5]

Used my TS75, Domino 500, and ETS sander to build my kids a dining table - standard height but small to fit in the family room.

Love the green kool-aid!

 

[FastEasySmartTOOL]

Last project was a dowel center finding jig! Used the Kapex and my MFT.

 

[RockstarRemodel]

Thanks for the contest! This is fun!

The last project I used Festool tools on is the one I'm still working on, a kitchen remodel, adding custom cabinets, a walnut countertop with a live edge, drywall repairs, and new lights. I'm using my MFT and TS55, Domino, and Rotex to build the custom cabinets and walnut countertop. I'm using my T18+3 and CT's to cut the recessed light holes. And my Planex makes the walls shine.

The last Festool project I finished is an understairs cabinet system for kitchen storage and cat box with ventilation and invisible hinges.

----

I'm leaving the above because I like attention, but please do not add me to the pool of qualified contestants. I have been lucky enough to win a CTMIDI at JLC Live a few years back, and top 5 in the 2014 video contest winning a C15 and other goodies. Thanks to these amazing tools I am able to make enough to buy my own stacks, and it'd be great if someone else won. I'll set a reminder to remove my post before the deadline.

Good luck everyone!

 

[deepcreek]

Just finished building an island top from reclaimed white oak.

So far I have used the TS75, Domino XL, and OF1400.

Bring on the Festool sanders!

 

[epicxt]

I'm in the last stages of finishing a new house for my parents. It's been a long project (sprinkling their work in between other work.) I'm at the end of the trim out phase and just finished a bunch of built-ins and two sleeping cubbys.
Tools used:
Nearly everything that is AINA, and some NAINA items.
TS 55 & 75
Cms w/add-ones
C15 and Ti-15
RO 90 & 125
Ets 125
Ets 150 and EC 150
MFK 700
OF 1010, 1400, 2200
RAS 115
MFS system
Ct-sys, midi, ct26
Workcenter
MFT
Planer with bench mount
Etc

Edit: forgot the Domino 500 & 700.

CXS would be a nice addition!

 

[Marshall Monnett]

I just finished up an oak vanity, used my Mft/3, ct48, ts55, of1400, of1010, vac sys, df500, df700, ro125, ro90, etsec 150, and kapex

 

[Christopher Fitch]

I just worked on repairing/replacing some damaged siding and sheathing as well as making a sandbox for my kids.

Tools used:
- TS55/FS1400 Track
- T15+3 Drill

 

[rst]

Finished edge sanding three sets of rounded edge bronze acrylic sliding doors I'm making for a customer that has supermarket heated cases and the doors  are NAINA or anywhere else.  Used my Ts 75 to cut to size, Sys Vac to hold while sanding with the LS 130.  Love my Sys Vac.  [big grin]

 

[Phil Beckley]

Can I make a suggestion?

When such competitions/sweepstakes are run, could it not be in collaboration with [member=41214]Phil Beckley[/member] in the UK/Europe to open the entries up to a wider FOG audience?

Hi
This is a cool idea from Festool US  [thumbs up]......will suggest to Festool UK marketing  [wink]
rg
Phil
(will see if we have any 90th CXS left  [cool])

 

[chrisrosenb]

I am just completing a 16 foot long set of book shelving.
I used a TS55 saw, guide rails, Domino, ETS EC 125 sander, RTS 400 sander, Carvex jig saw, T18+3 drill & T15+3 drill.

 

[JYip]

Just finished building a fireplace mantle and a wine bar counter top.

Tools used:
TS55 Track Saw
C15 Drill
Carvex 420 Jigsaw
Domino DF500
DTS 400 Sander
CT36 Dust Extractor
OF1400 Router

 

[Theshipstore]

Just delivered a coffee table of book match walnut with live edge still on. Customer using it in a screened room
TS55, Domino 500, RO125, ETS 125, Sipo 8mm Domino's, CT Midi

 

[Tyler Ernsberger]

Just finished up an outdoor TV cabinet.  Cabinet is made out of Azek PVC and the doors are made out of western red cedar. 

Festool Tools Used
-ts55req
-ct36
-ct midi
-df500
-ets ec 150 3mm
-ro150req

 

[BMAC]

Just about completed a medium sized basement renovation for a customer and part of that work was building a level raised platform for the washer and dryer and a laundry wash tub and a split countertop above. Still need to apply skirt boards to the platform edges and a few other items.

I used my TS 55 REQ saw, tracks and ETS 150 sander to cut the plywood for the platform and to cut the countertop to width. ETS 150 sander to smooth out the jigsaw cuts on the post formed back edge.

 

[NVA_WW]

My last project using Festool was sanding all the wood railing on my deck in preparation for sealing.  I used the CT26 for the sanders, LS130 for the spindles, and the RO90 for the rest of the wood.

 

[nclemmons]

Just completed this vanity and medicine cabinet for my son's bath. 

Maple ply with soft-close full-extension blum glides. 

Finished with BM Advance.

Festools used included CMS, 1010 router, T-15 Drill, Kapex, Domino, TS55 REQ with Seneca guides, Carvex, and 150/3 sander. 

And of course an MFT and CT-26 with boom arm.

Festool makes it easy!

Neil

View attachment 1

View attachment 2

View attachment 3

 

[tms0425]

Just finished a member picture display board for our church using Kapex, TS55, MFT, CXS, CT22, and RO90.

 

[Mort]

Outdoor sittin' bench. Cedar and fir are the woods.

The Domino 500 handled a majority of the joinery. The Carvex cut the curves with a FS145 blade. The RO90 sanded all the nooks and crannies and the ES125 took care of the fine finishing.

 

[Darren.Brown120]

I made a pair of night stands using the domino, ETS 125, CT Mini, and TDK 12 drill.

Sent from my iPhone using Tapatalk

 

[Darren.Brown120]

I made a pair of night stands using the Domino, ETS 125, CT Mini, and
TDK 12 drill.

Sent from my iPhone using Tapatalk