Power Mod for MFT/3

[bobberner]

Hi guys,

Here is a little thing I worked up out of scraps for convenience. It might not be very apparent in the photo, but I have one 1/4-20 bolt and wing nut to keep the device from moving around. My compressor and Midi are plugged in. The power strip only has a 15 amp breaker and my TS75 tripped it while I was ripping some 2" slightly warped oak.

 

[ben_r_]

Heres the 20 amp power strip I use: LINK

 

[Geoffrey]

I have that same power strip plugged into a 20 amp circuit. Needed it for the DeWalt 735 planer.