With the Series 1.0 PPS did they only make TWO sizes of H/O Cups: Large - 28oz and Mini - 6oz? Did they ever make something in between the Large and mini H/O cups? I have a Large cup and a Mini cup. The liners that I have for the Large cup don't look right. When I put the liner in the Large H/O cup it has at least an inch and maybe more from the bottom. It seems like the liner should go to the bottom of the cup
PPS Series 1.0
- Thread starter krudawg
- Start date
PeterJJames13
Member
- Joined
- Jul 18, 2018
- Messages
- 258
I've recently gotten into the pps system. While I'm far from an expert, I found a document showing all the 1.0 and 2.0 products. Attached is a screenshot from the PDF I found. Essentially there is a midi and large from what I can see.
PeterJJames13
Member
- Joined
- Jul 18, 2018
- Messages
- 258
I have the entire PDF showing pps 1.0.and 2.0 products but am unable to upload via Tapatalk. I'm happy to email it if you would like. Just shoot me a message. Thanks go to @DynaGlide - he posted the file originally. He may be able to point you to the web page with the PDF as well.
Yes. I see now that they made only the Large and Mini. I've been spraying with the mini on my Fuji T75G gravity-feed gun and 6oz of paint goes pretty fast - even with my fluid knob turned down. I don't understand why they waited until Series 2.0 to make a 22oz H/o cup (at least I think I saw they make one now). I guess Im going to have to switch to my Aerojet AS1 Gravity Feed gun for the bigger jobs. Thanks all for the quick replies.
PeterJJames13
Member
- Joined
- Jul 18, 2018
- Messages
- 258
Wouldn't the 16124 work for you? It's a 28 ounce cup I believe.krudawg said:
Similar threads
