Question regarding CT 33E socket

[teocaf]

The power socket where the tools plug in to the front of my old CT 33 came loose.  The front plastic part came off with the plug to my saw and the 2 wires could be seen inside the hole.  After unplugging I felt around in there and I think it's a clip that came loose--i don't think it was a hard break on anything--just whatever was retaining it came undone.  Has anyone had this happen?  Is there an easy fix to get in there and get it repaired?  Appreciate any input.

 

[bobbobbob]

Have you checked the parts diagram on ekat? 

 

[teocaf]

I checked ekat and their drawings match the documentation I have in my manual.  I was actually wondering if anyone else has had this problem and would have some advice on the best way to get inside the unit behind the socket before I started taking everything apart.  Is there a way to get to it from the top or do I have to unhinge it and can only access the area from the inside?

 

[nclemmons]

In the past, I have replaced the outlet on a CT-22. 

Suggest you call Festool service tomorrow morning and they can get the parts for you.  I no longer have the vac - but I seem to recall screws from the front let you remove the outlet and replace it.  Might be a loose wire or back-plate screw that came loose.

neil