Recessed roller assembly for 3/4 plywood doors?

[mcooley]

Does anyone have a solution they like for sliding 3/4 plywood doors?

I was hoping to find a heavy duty recessed roller assembly that would mate with a low-profile track on the bottom edge of the 3/4 panel. I even thought the Domino might work for doing the slot assembly.

I've seen them in the past but they aren't always long lasting.

Any other solutions or alternatives?

Thanks!

 

[tjbnwi]

Johnson makes pocket door and by pass door hardware for 3/4" doors.

http://www.johnsonhardware.com/111pd.htm

http://www.johnsonhardware.com/sdindex.htm

You could go with a roller sheave.

http://www.centralrestaurant.com/Franklin-Machine-Products-103-1197---Side-Mount-Sheave-Roller-c196p60604.html?st-t=google_shopping&vt-k=&vt-pti=159005312935&gclid=CM23kLOKmskCFQccaQodK4MJTw

http://www.windowdoorparts.com/01-305n-sliding-closet-door-roller-sheave.html?gclid=CKn1jM-KmskCFQIQaQodIksCeQ

http://www.cabinetmakerssupply.com/sheaves_and_track_cabinet_supply_873_ctg.htm

Tom

 

[rvieceli]

Passage door or cabinet door ala mid century modern furniture?

 

[mcooley]

Very cool, thanks, that last link is what I remember seeing in the past. These doors I am doing are short so the load should be fine. I think for doors like closets they may not be the most reliable. 

m

 

[mcooley]

Very cool, thanks, that last link is what I remember seeing in the past. These doors I am doing are short so the load should be fine. I think for doors like closets they may not be the most reliable. 

m

Similar to what is on the background here except a stand-alone cabinet.