Rotex RO150 Pad Wobble Question

Skellyy

Member
Joined
Mar 8, 2015
Messages
28
Hey all, quick question on my Rotex 150.  I've been sanding my deck and all has been going well.

Using it today, and all of a sudden it felt like the sanding pad was loose.  So I shut the sander off, and there is some rotational slop in the pad (while in rotex mode).  I get about a 1/4'' wiggle if I rotate the pad back and forth before the rotex gears engage.

Is this normal or am I going insane?

Thanks
 
Back
Top