Sawstop portable saw

[jeep jake]

Does anyone know if there is out feed table available? Or has anyone built one?

 

[jbasen]

Based on what I saw on the sawstop web site there isn't one available. This makes sense since the saw is meant to travel to a job site and an outfeed table would be an issue to transport

Not sure how easy/hard it would be to build one.

I have a Sawstop PCS and have adapted one of these for my saw

http://www.grizzly.com/products/26-Outfeed-Roller-For-Table-Saws/H8875

 

[nclemmons]

Read Ron Paulk's review of the Job site Sawstop on Youtube.  He talks about using his Paulk workbench as an out feed table for it.  He did have to adjust the height about 1/2" I think but is happy with that approach.

 

[flair woodworks]

SawStop does not make an out feed table for the Jobsite saw.

 

[jeep jake]

Thanks guys I will try to find Ron Paulks review, I was hoping there would be a Rousseau table available by now but it doesn't look like it. That grizzly outfeed looks pretty sweet

 

[jeep jake]

So I picked one up and the mft3 is almost the perfect height. Does anyone have the blade guard dust collector? If so what are you using for dust collection, specifically the Y splitter

 

[curt boyer]

I have my JSS mounted in the truck. My mft style workbench functions as a 11' out feed support. I have a 1 hp dust collector that uses a 2-1/2" hose to the saw and a shortened 36 mm AS Festool connected to the dust hood. I'm cutting a lot of Azek on my current job and it's nice not to have all the charged sawdust all over the place. I have a Rousseau table and out feed table for an older Makita table saw. It's a great setup! I am going to make a bracket that will connect to my JSS folding stand and the Rousseau out feed stand.
Cheers
Curt

 

[jeep jake]

Curt who makes your dust collector.

 

[Debug]

I use my MFT in my basement shop as an outfeed for it.  It works perfectly.

 

[jacko9]

I use one of these in my shop since it's so cheap and portable.  It does hold a lot of weight and is easy to set up.

http://www.woodcraft.com/product/159010/htc-portamate-adjustable-pedestal-roller-stand-htc-pm5080.aspx

Jack

 

[grbmds]

I have a couple of worktables that are on wheels. I have used one of them for an infeed table for the Sawstop jobsite saw. It would also work as an outfeed table. I have found that a drawback to the saw is the short infeed area on the table, but that would be characteristic of any jobsite saw of any brand.