Robbonthejob
Member
- Joined
- Jan 17, 2022
- Messages
- 1
Hello All,
I am selling the abovementioned at 80% of current retail - all expect the CTL extractor are either very lightly used or as new. All are 220v version, sorry USA [big grin]
CMS unit (the now discontinued router table) - has perhaps 10 hours of usage, is basically as new.
Trion Jigsaw PS300 EQ Plus - this jigsaw has cut at most 10 linear meters, its in perfect condition
Router OF1400 EBQ Plus - < 20 hours runtime, perfect condition.
Plunge Saw TS55 EBQ Plus - lightly used for DIY, 100% serviceable, no damage, only slight signs of use (eg. base plate rubbed at bit).
Hole drilling guide LR32 SYS - in perfect condition.
CTL26 Extractor: Used quite a lot already, and is missing the hose garage - otherwise is 100% serviceable. 65% of retail for this one.
Lastly...a Mafell KSS300 Maxi Max (tool is similar to Festool HK55, but corded and smaller.) Cross-cut rail and 1400mm rail fit together with the saw in one systainer.
Please Email me at hewetson.r@pg.com if interested. All tools are in Cape Town South Africa, I will pay the shipping by courier myself. Regards, Robert
I am selling the abovementioned at 80% of current retail - all expect the CTL extractor are either very lightly used or as new. All are 220v version, sorry USA [big grin]
CMS unit (the now discontinued router table) - has perhaps 10 hours of usage, is basically as new.
Trion Jigsaw PS300 EQ Plus - this jigsaw has cut at most 10 linear meters, its in perfect condition
Router OF1400 EBQ Plus - < 20 hours runtime, perfect condition.
Plunge Saw TS55 EBQ Plus - lightly used for DIY, 100% serviceable, no damage, only slight signs of use (eg. base plate rubbed at bit).
Hole drilling guide LR32 SYS - in perfect condition.
CTL26 Extractor: Used quite a lot already, and is missing the hose garage - otherwise is 100% serviceable. 65% of retail for this one.
Lastly...a Mafell KSS300 Maxi Max (tool is similar to Festool HK55, but corded and smaller.) Cross-cut rail and 1400mm rail fit together with the saw in one systainer.
Please Email me at hewetson.r@pg.com if interested. All tools are in Cape Town South Africa, I will pay the shipping by courier myself. Regards, Robert
