JPatrickWinstead
Member
- Joined
- Nov 13, 2009
- Messages
- 24
Clearvue Cyclone dust collection system. It's a complete system including the cyclone and quite a bit of pipe and fittings. The system was purchased new, has seen about 6 months of light use, and, other than being dusty, is in perfect shape. This is a WONDERFUL unit and is perfect for a hobbyist or small commercial shop. I'd rather sell the whole package and not piece it out.
If you're looking to add high-end dust collection to your shop this will give you almost everything you need. I'll even give you some advice on how to set it up. All of the fittings can be reused, and the pipe is in lengths from about 2' to 8'. You might need to buy more pipe, depending on your layout, but that's the cheapest piece of the puzzle at any rate.
The system is currently installed and running in my shop if you'd like to see it in action, although I'll be disassembling it over the month of June, so act fast.
Additional info can be found at www.clearvuecyclones.com
Package includes:
-Clearvue CVMAX Single Phase (240V) - 5 hp Leeson motor
http://www.clearvuecyclones.com/cv-max/20-cv-max-single-phase-with-filters.html
-Upgrade to "Nano" filters
-Clean out box
-Electrical Box with remote
-47 Gallon Fiber drum for chips
Blast Gates:
(4) 6" PVC blast gates
(2) 6-4-4 Transition with blast gates
(1) 4" Blast Gate
Fittings:
All SDR35 PVC (Sewer & Drain) as spec'd by Clearvue
(1) 8-8-6 Wye, (1) 8-6 reducer, (5) 6-6-6 Wye, (12) 6-6 45deg, (1) 6-6-4 Wye, (2) 4-4 45deg, (2) 4-4 90deg, and some other misc stuff
approx 60' of 6" pipe of various lengths
approx 10' of 8" pipe
Price:
Off the shelf this is about $3500 worth of stuff. I'm asking $3000.
I'd rather not put my phone number up here, but send me an email and I'm happy to call to discuss. I'm in Western Massachusetts.
If you're looking to add high-end dust collection to your shop this will give you almost everything you need. I'll even give you some advice on how to set it up. All of the fittings can be reused, and the pipe is in lengths from about 2' to 8'. You might need to buy more pipe, depending on your layout, but that's the cheapest piece of the puzzle at any rate.
The system is currently installed and running in my shop if you'd like to see it in action, although I'll be disassembling it over the month of June, so act fast.
Additional info can be found at www.clearvuecyclones.com
Package includes:
-Clearvue CVMAX Single Phase (240V) - 5 hp Leeson motor
http://www.clearvuecyclones.com/cv-max/20-cv-max-single-phase-with-filters.html
-Upgrade to "Nano" filters
-Clean out box
-Electrical Box with remote
-47 Gallon Fiber drum for chips
Blast Gates:
(4) 6" PVC blast gates
(2) 6-4-4 Transition with blast gates
(1) 4" Blast Gate
Fittings:
All SDR35 PVC (Sewer & Drain) as spec'd by Clearvue
(1) 8-8-6 Wye, (1) 8-6 reducer, (5) 6-6-6 Wye, (12) 6-6 45deg, (1) 6-6-4 Wye, (2) 4-4 45deg, (2) 4-4 90deg, and some other misc stuff
approx 60' of 6" pipe of various lengths
approx 10' of 8" pipe
Price:
Off the shelf this is about $3500 worth of stuff. I'm asking $3000.
I'd rather not put my phone number up here, but send me an email and I'm happy to call to discuss. I'm in Western Massachusetts.
