SOLD
Up for auction is a custom Festool CMS plate with a routed opening to accept Rockler sized router plates (8-1/4”x11-3/4”). This is the CMS plate only. Anything else pictured is for demonstration purposes only and is NOT included.
Regular plates (9-1/4”x11-3/4”) will not fit unless you route the aluminum out enough to make room for your plate.
Worldwide shipping available through ebay’s global shipping program:
ebay.com:https://www.ebay.com/itm/203210962318
ebay uk:https://www.ebay.co.uk/itm/Festool-...-1-4-x11-3-4/203210962318?hash=item2f5051358e:g:1-cAAOSw0Z1fzaFd&shqty=1&isGTR=1#shId
ebay de:https://www.ebay.de/itm/Festool-CMS...-1-4-x11-3-4/203210962318?hash=item2f5051358e:g:1-cAAOSw0Z1fzaFd
This plate was made from a blank CMS-PS plate. The routed opening is not perfect as it was not CNC cut. It will leave a slight gap between your router plate and the CMS plate (See photos).
In order to make this work with your CMS you will need to attach a support system to your CMS base unit (See pictures for an example-I made one out of 8020 extrusions and brackets). This will support the weight of your router lift/plate and your router.
Locking screws that come on the CMS-OF plate are not included. You can take these off your CMS-OF plate or order them on Festool’s online parts catalog (ekat).
If you have any additional questions please feel free to message me
No Reserve!
More pictures can be seen on the ebay links
[attachimg=1][attachimg=2][attachimg=3]
Up for auction is a custom Festool CMS plate with a routed opening to accept Rockler sized router plates (8-1/4”x11-3/4”). This is the CMS plate only. Anything else pictured is for demonstration purposes only and is NOT included.
Regular plates (9-1/4”x11-3/4”) will not fit unless you route the aluminum out enough to make room for your plate.
Worldwide shipping available through ebay’s global shipping program:
ebay.com:https://www.ebay.com/itm/203210962318
ebay uk:https://www.ebay.co.uk/itm/Festool-...-1-4-x11-3-4/203210962318?hash=item2f5051358e:g:1-cAAOSw0Z1fzaFd&shqty=1&isGTR=1#shId
ebay de:https://www.ebay.de/itm/Festool-CMS...-1-4-x11-3-4/203210962318?hash=item2f5051358e:g:1-cAAOSw0Z1fzaFd
This plate was made from a blank CMS-PS plate. The routed opening is not perfect as it was not CNC cut. It will leave a slight gap between your router plate and the CMS plate (See photos).
In order to make this work with your CMS you will need to attach a support system to your CMS base unit (See pictures for an example-I made one out of 8020 extrusions and brackets). This will support the weight of your router lift/plate and your router.
Locking screws that come on the CMS-OF plate are not included. You can take these off your CMS-OF plate or order them on Festool’s online parts catalog (ekat).
If you have any additional questions please feel free to message me
No Reserve!
More pictures can be seen on the ebay links
[attachimg=1][attachimg=2][attachimg=3]
