I finally got around to using the PARF Guide to cut all the holes and added a hose hanger with some scrap pieces I had laying around. I rearranged some of the pull outs to make room for the Dust Extractor.View attachment 1BeforeView attachment 2AfterView attachment 3Hose Hanger
Stay-At-Home Projects - MFT Cart Changes
- Thread starter jg24
- Start date
- Joined
- Jun 25, 2016
- Messages
- 624
[member=6610]jg24[/member] - what are the dimensions of your nifty Systainer cart?
how did you arrive at those?
Hans
PS: amazing how something as simple as a hook or bracket can help solve the annoyance of hose- or cord tangles [smile]
how did you arrive at those?
Hans
PS: amazing how something as simple as a hook or bracket can help solve the annoyance of hose- or cord tangles [smile]
Overall Dimensions are 56"L x 34"H x 31"D
The initial idea was to make it big enough for three systainers wide on both side. The height was based on sustainers I had at the time. I needed the height to allow for the largest Sys (TS55) and a Sys1. The area under the table top was thought to be for storage of various things.
Then recently I decided to get the SysVac off the floor, and utilize the "storage" area for more Sys Drawers. So, I added the two displaced Sys1 right under the top. I still have room for more sys combinations on the back side.
Right now I am working on a holder for Rockler Bench Cookies and bench dogs out of some acrylic. It will be mounted on the left end under the hose hanger.
The initial idea was to make it big enough for three systainers wide on both side. The height was based on sustainers I had at the time. I needed the height to allow for the largest Sys (TS55) and a Sys1. The area under the table top was thought to be for storage of various things.
Then recently I decided to get the SysVac off the floor, and utilize the "storage" area for more Sys Drawers. So, I added the two displaced Sys1 right under the top. I still have room for more sys combinations on the back side.
Right now I am working on a holder for Rockler Bench Cookies and bench dogs out of some acrylic. It will be mounted on the left end under the hose hanger.
I decided to make additional changes to my MFT Cart storage. The original design had Sys drawers on both sides, then I removed a few to store the CT22. Now, I’ve changed again and went back to a version of the first design.
I’ve changed to 28” drawer slides so all the Systainer are available from the front.
[attachimg=1]
[attachimg=2]
I’ve changed to 28” drawer slides so all the Systainer are available from the front.
[attachimg=1]
[attachimg=2]
