T 15+3 "screwdriver" Bit

[EdSweeney]

I own a T 15+3 drill and am looking for an "ordinary" flat screw driver bit. (Like an ordinary screw driver)

I am not sure if this is called "centrotec" or just "fast fix interface."

A picture of the bit is shown on the top lid of the systainer but I can not find it in the catalogue.

Thank you for any assistance.

Ed Sweeney

 

[jrs]

If you still have the bit holder, any "regular" driver bit should work. 

I don't see any regular "flat" drivers on the site, either.

 

[AlexThePalex]

Fastfix is the name for the connection of the chucks to the drill.

Centrotec is the name of the bits that go into those chucks.

These are the slotted bits Festool offers:

Bit slot head HiQ
SZ 0,8X5,5-100 CE/2 No. 492537

Bit slot head HiQ
SZ 1,2X6,5-100 CE/2 No. 492538

Slot bit
SZ 0,6x4,5-25/10 No. 493309

Slot bit
SZ 0,8x5,5-25/10 No. 493310

Slot bit
SZ 1,2x6,5-25/10 No. 493311

Didn't see them on the American site. Probably NAINA again, so only the rest of the world can buy them.

 

[speed]

http://cgi.ebay.co.uk/FESTOOL-495228-CENTROTEC-DRIVE-SCREWDRIVER-HANDLE-/200567535803?pt=UK_Home_Garden_PowerTools_SM&hash=item2eb2c1b8bb#ht_500wt_922

ordinary screwdriver ?

 

[RONWEN]

The best straight bits I have found are from Brownell's.  They cater to gunsmiths & so have a wide range of bit widths and thicknesses to fit any screw.  http://www.brownells.com/.aspx/cid=0/k=magna+tip+bits/t=P/ksubmit=y/Products/All/search=magna_tip_bits