t set kit

[notenoughcash]

its gone of the FTUK site?

is it just being re SKU's with a sys3?

just seems dumb if its beeing removed perminanly

 

[squall_line]

T Set Kit?

Can you be a little more specific?

 

[notenoughcash]

T-18 +3 set i think its called, as in the ones with all the different chucks, and 4.0 batterys

 

[squall_line]

I found it within three clicks on Festool UK:

festool.co.uk > Products > Drilling and Screwdriving > First item in the second row.
https://www.festool.co.uk/products/...ing/cordless-drills/576447---t-18-plus-3-hpc4,0-i-plus-gb

 

[notenoughcash]

nope, not that one.https://www.festool.co.uk/products/drilling-and-screwdriving/cordless-drills/576443---c-18-hpc4,0-i-set-gb

like that but with a T18 instead of a C18

 

[squall_line]

nope, not that one.https://www.festool.co.uk/products/drilling-and-screwdriving/cordless-drills/576443---c-18-hpc4,0-i-set-gb

like that but with a T18 instead of a C18

Ahh....

Festool removed the 90 degree and offset chucks from the T-Set within the last few years in the USA, possibly when they went to the 4.0 batteries and Systainer3.  EIther way, I think it's been completely removed from sets going forward.  I had to buy an older 3.1 set to get one with all four chucks in it.

 

[Coen]

nope, not that one.https://www.festool.co.uk/products/drilling-and-screwdriving/cordless-drills/576443---c-18-hpc4,0-i-set-gb

like that but with a T18 instead of a C18

Ahh....

Festool removed the 90 degree and offset chucks from the T-Set within the last few years in the USA, possibly when they went to the 4.0 batteries and Systainer3.  EIther way, I think it's been completely removed from sets going forward.  I had to buy an older 3.1 set to get one with all four chucks in it.

Well, if you remove the chucks it isn't a 'Set' anymore but a 'Plus'.

 

[FestitaMakool]

[member=72337]notenoughcash[/member]

There’s both C18 and this available outside UK: T 18+3 HPC 4,0 I-Set - 576989
[attachimg=1] [attachimg=2]

If you pull the trigger, be sure get the kit with the new rotatable right angle and offset chucks.
Makes it so much easier to adjust. Unless you get a good deal with the old attachments.

 

[squall_line]

nope, not that one.https://www.festool.co.uk/products/drilling-and-screwdriving/cordless-drills/576443---c-18-hpc4,0-i-set-gb

like that but with a T18 instead of a C18

Ahh....

Festool removed the 90 degree and offset chucks from the T-Set within the last few years in the USA, possibly when they went to the 4.0 batteries and Systainer3.  EIther way, I think it's been completely removed from sets going forward.  I had to buy an older 3.1 set to get one with all four chucks in it.

Well, if you remove the chucks it isn't a 'Set' anymore but a 'Plus'.

Good point, I forgot about that.

The "Set" hasn't been available in the US since they moved to the 4.0 batteries and the Sys3, even though the product pages showed the "Plus" with the extra chucks.

 

[notenoughcash]

[member=71478]FestitaMakool[/member] mmm......  i am gessing that it will be back in a bit with the new chucks and a sys 3 then.

is the T18+3 with the differnt chucks already included really NANIA?  well....  the joys of living in europe.....

 

[FestitaMakool]

[member=71478]FestitaMakool[/member] mmm......  i am gessing that it will be back in a bit with the new chucks and a sys 3 then.

For UK, I’d suppose it’ll happen soon. I’d buy the new attachments today if needed, and didn’t have any. Though I have the old ones and I don’t use mine very often, so I’ll stick with the old, which are working perfectly.