Think this will work? Plug-It adapter/retro-fit

The US 110v 16ga cord (no nub on plug it end) will work for all the tools.  Things are designed so you can't plug an 18 ga cord (extra nub on plug it end) Into a tool that requires a 16.  It does work the other way though

I have a 16ga attached to my CT hose and it works with all tools

John
 
Jmb my leads ( carvex and ts55rr ) can be swapped between tools , the only difference is on the ts the lead will only fit one way round !
 
Davej said:
Jmb my leads ( carvex and ts55rr ) can be swapped between tools , the only difference is on the ts the lead will only fit one way round !

oops miss read!  Just had a look again at your post!  Sorry!   
 
Hi, this is my first post here so go easy on me guys!
  I wanted to integrate some of my non-festool tools into my festool flow/system of work.

I managed to purchase this Part from Ebay in the uk (494 910).
[attachimg=#]

I wired it up to the desired non-Festool tool
[attachimg=#]

And now means I have one less lead to carry with me
[attachimg=#]

 

Attachments

  • Part number and suggested tool list.jpg
    Part number and suggested tool list.jpg
    2 MB · Views: 883
  • Crossbreeding.jpg
    Crossbreeding.jpg
    1.8 MB · Views: 897
  • Hooked up.jpg
    Hooked up.jpg
    2.1 MB · Views: 819
Awesomo said:
Hi, this is my first post here so go easy on me guys!
  I wanted to integrate some of my non-festool tools into my festool flow/system of work.

I managed to purchase this Part from Ebay in the uk (494 910).

This part in NOT available in the USA.
 
Back
Top