ti15 impact head

[johninthecamper]

if the impact head just fits on where the centrotec head goes, does that mean that the impact can fit on the other full sized drills,not a question of the larger 18t or the smaller 12,mainly if it will fit on a c15,although if it would work on all of them that would be so cool and I think very festool like.I'm a going down to the store tomorrow and see if it works

 

[RC]

To my understanding there is no 'impact head' but a 'impact mode disengager'-head that I think you are talking about?

The extension that you have to put on the Ti15 before you can attach the older corner, etc. chucks has a pin that pushes into the Ti15 body and disengages the impact hammering mechanism so that you won't break the normal drilling attachments. The impact mechanics is in the Ti15 body.

 

[Kev]

Think of it as an "anti impact head" and you're on the right track.

 

[tbellemare]

Those anti-impact head comments are absolutely correct!

Furthermore, the additional chucks, like the keyless, right angle, eccentric, or depth stop won't fit the hybrid without the anti-impact head attached so that they don't get damaged by the impact. The centrotec and impact keyless will however fit without the anti-impact head because they can take the impact.

Tom