UJK Technology Guide Bush Set and Axminster Hole Template

[mac sparrow]

[member=8712]Richard/RMW[/member] & [member=11196]Peter Parfitt[/member],

Is the content of this thread still accurate?  I see the circle template is no longer available from Axminster but the guide bushes are.

[member=8712]Richard/RMW[/member], is the chart you produced the amended version or is it still the wrong version?

I am about to order the guide bushes and would like to print this chart off.

Thank you both.  It may be 4 years old but the content is still very helpful.

 

[rmwarren]

[member=8712]Richard/RMW[/member] & [member=11196]Peter Parfitt[/member],

Is the content of this thread still accurate?  I see the circle template is no longer available from Axminster but the guide bushes are.

[member=8712]Richard/RMW[/member], is the chart you produced the amended version or is it still the wrong version?

I am about to order the guide bushes and would like to print this chart off.

Thank you both.  It may be 4 years old but the content is still very helpful.

[member=26410]mackenzie[/member] I have not updated anything so do not trust an version of the chart. Sorry. Best to lean on Peter's formula.

RMW

 

[Stone Message]

[member=8712]Richard/RMW[/member] & [member=11196]Peter Parfitt[/member],

Is the content of this thread still accurate?  I see the circle template is no longer available from Axminster but the guide bushes are.

[member=8712]Richard/RMW[/member], is the chart you produced the amended version or is it still the wrong version?

I am about to order the guide bushes and would like to print this chart off.

Thank you both.  It may be 4 years old but the content is still very helpful.

I keep telling Axminster to stock that template again but I think the manufacturer has gone bust.

The guide bushes are still available and I mentioned them again in a very recent video. I use them a lot.

Peter

 

[mac sparrow]

[member=8712]Richard/RMW[/member] & [member=11196]Peter Parfitt[/member],

Thank you both.

I will stick with Peters formula and create my own chart based on it.

Off to order the guide bushes.

 

[Womble]

I also wanted to purchase the hole template recently but found it was unavailable.
Even if the original manufacturer has gone bust surely it wouldn't be at all difficult for Axminster to find a new supplier to CNC them on limited manufacturing runs. Its not like Holes of specific mm diameters could be patented LOL

But i would 100% purchase one if Axminster stocked them again, they would be very useful on occasions. 

 

[neeleman]

[member=63560]Womble[/member]
The hole template is available from Sautershop Germany.
Which also includes a special routerbit.

 

[Cheese]

Even if the original manufacturer has gone bust surely it wouldn't be at all difficult for Axminster to find a new supplier to CNC them on limited manufacturing runs.

Hmmm...Britain's very own version of Woodpeckers One Time Tool...  [big grin]

 

[Klemm]

if we see a wider interest in this template product we will stock it here in the US or produce one ourselves if not practical to import.

Let us know . . .

Hans and Eric

 

[rmwarren]

-1 for me, I have one coming soon @ a cost $1,700. Known as the Shaper Origin.

Totally expecting the SO to replace a ton of jigs, templates, etc. in the shop. Or so I've convinced myself.

RMW

 

[rst]

I'm with you Richard...Shaper E'd me asking for shipping address as part of stage II shipping.  [big grin]

 

[rmwarren]

I'm with you Richard...Shaper E'd me asking for shipping address as part of stage II shipping.  [big grin]

Now that's just plain nasty... I ordered mine at 11:59:59 UST on the last day of batch 2.  [doh]

Whoever said "patience is a virtue"?

RMW