Which centrotec drill countersink for oak plugs?

[Jimmy FineCut]

I recently bought one of these in 3.5mm and I am very impressed with it.

[attachimg=1]

My question is which one out of the 4.5mm and 5mm bits will have the right size countersink bit to work with some oak plugs that taper from 11mm to 15mm?

[attachimg=2]

 

[neeleman]

Diameters on all these Festool drill-countersunk-bits are 13 mm.
You can better use the QLS D5-15 countersink (492521).
Or buy a set of plug cutters and matching drills.

 

[griffs]

I recently bought one of these in 3.5mm and I am very impressed with it.

[attachimg=1]

My question is which one out of the 4.5mm and 5mm bits will have the right size countersink bit to work with some oak plugs that taper from 11mm to 15mm?

  I would say you need a forstner bit ,I dont know what the festool counter-sink do ,do they counterbore as well?
[attachimg=2]

 

[Jimmy FineCut]

Thanks for that, I didn't realise they are all the same size which means the one I already have should work!

I do have one of those other counter sink bits, but I much prefer the depth stop bit after using it and I am to lazy to cut my own plugs! [wink]

Cheers.

 

[dltflt]

Snappy has some nice countersink bits.  I think they are centrotec also.