Work boots

GPowers

Member
Joined
Mar 1, 2010
Messages
2,326
Time to ditch the Tennis shoes and get some real work shoes, any suggestions? For use around the house and small jobs

I saw an ad this weekend for several brands, Timberland, Dewalt, Wolverine, Bates, Keen and Dickies.

What should i buy regular height, 6" or 8"?

Steel toe?

Thanks

Greg
 
You might want to take a look at Mechanix Wear shoes. They could work well considering you're switching from tennis shoes.

Tom
 
What you should get depends on the level of wear you give them.  do you spend a lot of time walking?  Do you really need steel toed boots? many moons ago, I bought very heavy boots and wore out three or four pairs a year.  today, now I am 39, it takes over a year for me to wear out what i wood have considered very light weight boots in my masonry days.  i would wear sneakers to work, except i spent so many years insisting my helpers/and even masons working for me to wear substantial foot wear. No sneakers on the job if they were working for me.  Now, my whole crew listens >>> all one of me
 
I switched after stepping on a nail during my basement reno. When right through my running shoe. Spending four hours in the ER waiting for a tetanus shot is a real drag. I got out about 2:30 in the morning. If you work on rough ground I’d suggest something over the ankles to help prevent sprains.
 
Greg,  Steel toed shoes and boots have saved me and my long-time employee each from catastrophic foot injury.  I've been wearing steel toes for so long that, like a seat belt or a helmet on a motorcycle, I feel strange without using them. 

We have been wearing Timberland and Keenes, for many years, and before that, I wore Red Wings for many years.
 
I am not contradicting Rob Z but union craftsman no longer have to have steel toe work boots. A study showed that over many foot injuries the steel toe caused the injury to be worse. This does not mean that an injury cannot be prevented by steel toes but percentage was the non steel toe injury fared better. Just my input, MARK
 
Stopped wearing steel toecap boots year's ago. I always get the composite ones. Same protection but a lot lighter. If you do a lot of up and down stairs it makes a big difference . Currently wearing Uvex Xenova trainers,
I have spent over 30 years trying to find the ' holy grail ' of footwear for work and I am no nearer now than ever, mostly because when I do find the ' perfect ' shoe , it's discontinued next time I need to replace them.
Dave
P.s . About 10 years ago I had a 3.3 kva transformer fall onto my foot from about 2 feet and it broke my big toe ( wearing trainers at the time ) yes it hurt ( even though I drove  home and didn't go the hospital till the next day . I now can't  bend my toe as the joint has 'fused' straight. Ever since then I always wear protective footwear even when working at home.
Dave
 
I've got a few steel toed Redwings that have been great, if you have one of their stores nearby it would be worth checking out
 
Untidy Shop said:
[size=14pt]

I wear Steel Blues, almost 24/7. They provide excellent comfort in activities ranging from 8 hour shifts on a concert floor in a Retail/Trade Timber Yard, owner building, gardening and of course activities in the Untidy Shop.

http://www.steelblue.com.au/our-range/industrial-construction/argyle/

http://travsoutfitter.com/search?q=steel+blue&search-button.x=0&search-button.y=0

Great boots.  One of my clients is actually the founder of the Steel Blue Brand.  He's  Semi Retired now and enjoying the country life.  Once i wear out my current boots they will definitely be my next choice
 
I had a friend who got his toe caught in his steel toed boot when a heavy beam landed on it.  He had more damage to his foot from the extraction than from the accident itself. 

The only time i had a "coulda been" serious accident to my foot was:  Here we go again.  you guys made me do it, so suffer.>>>>>>>>>>

When i was in mason biz, often at end of day when we cleaned up an area, we had some very sturdy rubber buckets that we would put the debris into.  If there was mortar left, that went into the buckets first.  with the taper of the bucket sides, the next day, a quick bounce, or whack with heavy hammer would spring the solidified mortar out and easily disposed of without making a mess.  I had shown the crew, and very explicitly told them that if loose debris went into the buckets first, the mess might well be nearly impossible to extract the next day.  One could beat on the bottom of the bucket, the sides and use every bit of vocabulary known to man, especially man in the building trades, and the debris would not dislodge from those rubber buckets.

One morning, after a few things had gone wrong and frustration was flying out of my ears as big shooting flames, i had told my helper to empty out the buckets into the dump truck and we could use the debris on another job where we were dumping broken blocks, brick dust and any other debris not decayable.  Joe was beating away on one of the buckets with no success to dislodge the solids.  I was in a hurry to get away and heading to a meeting on the next job.  I was getting more impatient by the minute and finally went over and grabbed the hammer from Joe, turned the bucket upside down, as i had shown my helper to do.  A few good whacks and ......... nothing happened.  I started beating on the sides of the bucket, but the bucket had long ago lost its even taper and the hardened cement was much stronger than brick mortar.  It was actually hardened concrete that had been used to finish off the top of the chimney we had been working on.  Those chimney "collars" were made with a richer mix than even anything used on a garage floor.  it was strong, and by that time, very hard. 

i was banging away and letting Joe know that I was just a wee bit upset that he had not done as i had told him with other cleanups.  In my most polite (definitely not) way, I decided very radical demonstration was in order.  I picked up that bucket over my head and with the bucket upside down slammed it, for all it was possible, towards the ground.  It hit the ground, upside down and with just enough loose space in the top, as it hit, the sides buckled in a little.  They buckled just enough, that as they sprung back into the natural shape, that full bucket became a projectile and catapulted about six or seven feet back into space.  I was so surprised, I just stepped back, looking up at my handiwork as it seemed to hang in mid air for a brief moment.  As the bucket started heading back towards earth, i still admired and stepped back..... with only one foot.  the other foot sort of remained anchored in place, i guess i was marking a spot for that bucket to land.

well. it obeyed my directions.  It landed right on my big toe.  We had to do some cutting of boot to get my swollen toe out of there.  By the time we got the boot off, I guess i had softened my attitude a little bit and everybody on the job was laughing, including yours truly.  By the time i got home (I drove my truck myself), the toe was swollen to about twice its normal size and a deep blue color.  I took a small drill out of my tool box and boiled it in water for a few minutes, added disinfectant (in those days, we used iodine)to both toe and drill and went to work thru the toenail to relieve the pressure.  I went to my meeting, a little late, but was able to hobble around the site with the owner and finished my day working.  I must have done something right that day.  the toe was not broken and my first aid method did not cause any infection.  I think it might have been a bit more problem had i been wearing steel toed boots (which i never have worn before or since.)

I suppose I might have used wow's first aid kit to good advantage that day. [wink]
Tinker
 
I wear the Timberland Pro steel toe work boots- Notch model.  Swapping between two pairs over the last several years.  Top quality, excellent daily wearer fit, anti fatigue, thinsulate, top marks all around.  To apply a well worn phrase,  they're the Festool of boots...
They have some more casual models in their line that look pretty good, but since these have saved my toes a number of times and are so super comfortable for long periods, I will continue with this model.
 
Tinker said:
I suppose I might have used wow's first aid kit to good advantage that day. [wink]
Tinker

I don't think there's a sterile drill bit in there, but there's certainly everything else you would have needed.

You remind me of a quick story - NOT foot related - but...

Many years ago I built some oak shelving for the loft in my (then) young daughter's bedroom. I had sized it carefully to fit between the studs, but one of the studs had a bit of a twist to it. I had the shelf ALMOST into the space, but it wouldn't quite go the last little bit, so I grabbed a piece of wood to protect the finished shelf and placed it over the stubborn corner, then grabbed a hammer to 'persuade' it into place.

The first whack didn't move it, so i lined up on it again and took a mighty swing. As you might have guessed, what I hit was not the board, but my thumb.

Four hours in the ER that time as well, but I did get to keep the cool heated 'drill' that they used to bore through my thumb nail and release the blood that was trapped there...
 
Another happy steel blue wearer they are one of the only boots that will last a whole year for me and are bloody comfy for use all day. Can't recommend them enough
 
elfick said:
I'm on the same quest myself. I've tentatively narrowed it down to Danner or Redwings. I'm probably heading to the Redwings store this weekend to try some on. The closest match I've found to my dream boot is http://www.danner.com/product/military/danner-marine-8-mojave-nmt.html but I'm uncomfortable wearing something with the USMC logo on it, as I never earned the right to do so.

First, I doubt that anyone would notice. People tend to be oblivious to most detail unless it's pointed out to them.

About the boot - as nearly as I can tell, the Danner Marine boot doesn't sport a USMC logo, it is just certified to their standards. BIG difference.

Since it is for sale to the general public, if that's the boot you want, I'd buy it. You could easily argue that you bought a "Made in USA' boot that is certified for the marines, and you are supporting Danner in their efforts to support our troups.

I don't see how anyone could fault you for that?
 
I'm a finish carpenter and cabinetry installer, and used to wear athletic shoes to work until about a year ago. I saw an X ray of someone's foot that had had a sheet of mdf drop on it  [eek]

I have to be very mobile and spend a lot of time crouching on my knees, which narrows down which protective toe cap models I can wear.  Couple that with working in SoCal and needing something lightweight and breathable, and I finally settled on a pair of Keens recently after wearing through a timberland (though I might try them again next.)

I had really good experiences shopping through Zappos.com -  shipping (including returns)  is free, and customer service has been great.  They even guarantee your satisfaction for a full year afterwards.  I was able to try on more than half a dozen different models/brands to find one I liked by purchasing them and then returning for a full refund.
 
My latest pair are steel blues, I like them a lot, lightweight, super comfortable, and they're turning out to be quite durable aswell.
 
Back
Top