nickao
Member
- Joined
- Feb 24, 2008
- Messages
- 4,617
82" x 48" MFT 1080 style extrusions and legs FULL TABLE.
Since I have another that is 110 " x 48"(A full 1080 plus a big table) I am going to sell this one. I really am going back and forth on it so I am not selling it for some crazy low ball number. For some reason because I have two this one always just ends up as a catch all for all my crap, like boxes tools etc and I can not even see the table after awhile. That means it was rarely ever used other than as a table. If it did not have a ton of stuff all over it I would take a picture right now.
Made with the Festool long extrusions and real Festool 1080 MDF hole tops. Has the 1080 legs and is Festool from top top bottom, not custom. I do not think you can get these long extrusions anymore. I used the 1080 long side extrusions for the depth on this table so it is a full 48" deep! It has the 1080 legs so it is lower than an MFT3. I put mine on 4 x 4 blocks, you can have them, but mine are cut for a crooked floor and would have to be re-cut for your use. You can add center leg support if you want, this only had legs on the ends. If you want a ROCK SOLID work bench this is not that. It has Festool legs on the end and wobbles like any MFT does. You will have to add center support etc if you want a rock solid bench. It is suitable for all cutting and clamping, I would not use a manual hand planer with it though. With my other large table I use Fir 4" x4"s as legs with stretchers and it is ROCK SOLID.
Make an offer. Please keep in mind what one MFT 1080 cost and this is about 3 MFT 1080's wide and this is ALL Festool made. Plus, it is unique as hell and I am under no duress to sell it at all. I will keep it posted a few days unless one offer is just to good to refuse. If the offer is right I will take it. After an accepted offer I will provide pictures and the buyer does not have to go through with purchase. Believe me, that will not happen. If I get a chance sooner I will put up pics, but kids are home and it is the holiday weekend. I only decided to sell it a few minutes ago.
It is NEW quality and I will clean it up to look brand new if it does not pass my inspection.
Since I have another that is 110 " x 48"(A full 1080 plus a big table) I am going to sell this one. I really am going back and forth on it so I am not selling it for some crazy low ball number. For some reason because I have two this one always just ends up as a catch all for all my crap, like boxes tools etc and I can not even see the table after awhile. That means it was rarely ever used other than as a table. If it did not have a ton of stuff all over it I would take a picture right now.
Made with the Festool long extrusions and real Festool 1080 MDF hole tops. Has the 1080 legs and is Festool from top top bottom, not custom. I do not think you can get these long extrusions anymore. I used the 1080 long side extrusions for the depth on this table so it is a full 48" deep! It has the 1080 legs so it is lower than an MFT3. I put mine on 4 x 4 blocks, you can have them, but mine are cut for a crooked floor and would have to be re-cut for your use. You can add center leg support if you want, this only had legs on the ends. If you want a ROCK SOLID work bench this is not that. It has Festool legs on the end and wobbles like any MFT does. You will have to add center support etc if you want a rock solid bench. It is suitable for all cutting and clamping, I would not use a manual hand planer with it though. With my other large table I use Fir 4" x4"s as legs with stretchers and it is ROCK SOLID.
Make an offer. Please keep in mind what one MFT 1080 cost and this is about 3 MFT 1080's wide and this is ALL Festool made. Plus, it is unique as hell and I am under no duress to sell it at all. I will keep it posted a few days unless one offer is just to good to refuse. If the offer is right I will take it. After an accepted offer I will provide pictures and the buyer does not have to go through with purchase. Believe me, that will not happen. If I get a chance sooner I will put up pics, but kids are home and it is the holiday weekend. I only decided to sell it a few minutes ago.
It is NEW quality and I will clean it up to look brand new if it does not pass my inspection.