Chris Hughes
Member
- Joined
- Mar 15, 2008
- Messages
- 572
This is a project I have been working on since October last year. The job is the complete build out of a basement guest and entertainment area. This space incorporates wall to wall walnut wainscoting, 4 televisions including a 65" and a 32" karaoke monitor, gas log fireplace, brick lined arched ceiling, wine cellar, and an elevated, full sized sport bar.
I lucked into a gig back in September that required my particular set of tools. Namely, my new boss needed me to build all of the casework for this project. My boss was very skeptical about the entire Festool concept but the job specs called for frameless cabinets and was not entirely comfortable with the build. I wanted to use the entire Tru 32 system line boring the side panels for every bit of hardware possible but the boss was inclined to install hardware in the field. We compromised by building our boxes using the metric system for height and standard english per the print for width, no holes.
The drawers are all domino drawers which is an upgrade in that the previous standard drawer was a box nailed together. For whatever reason the existing standard also includes 3/4"ply sides with edgebanding and 1/4" ply bottoms.
We used Blum hardware both for hinges and slides
I lucked into a gig back in September that required my particular set of tools. Namely, my new boss needed me to build all of the casework for this project. My boss was very skeptical about the entire Festool concept but the job specs called for frameless cabinets and was not entirely comfortable with the build. I wanted to use the entire Tru 32 system line boring the side panels for every bit of hardware possible but the boss was inclined to install hardware in the field. We compromised by building our boxes using the metric system for height and standard english per the print for width, no holes.
The drawers are all domino drawers which is an upgrade in that the previous standard drawer was a box nailed together. For whatever reason the existing standard also includes 3/4"ply sides with edgebanding and 1/4" ply bottoms.
We used Blum hardware both for hinges and slides