A LR32 video. The last video of the series. Video 7

[erock]

+1 on start to finish. What size euro screws do you use?

Michael,

  I use 6.3 x 13 euro screws.

 

[Rocky]

Is your source McFeeley's?  I have 5 sets of those adjustable feet, so your next install video will be great.  Thanks Eric.

 

[erock]

Is your source McFeeley's?  I have 5 sets of those adjustable feet, so your next install video will be great.  Thanks Eric.

No Michael,  I go to my local mom and pop woodworking store for my screws and door hinges. 

Eric

 

[skids]

Wow! Good stuff mang!! Music Montages, credits..Loving the progress! And the content is great, I would have no idea what to do with that LR32 thingy, but thanks to you I am interested and following these.

 

[sprior]

There are lots of videos of individual procedures and a few of complete cabinet construction.  What makes the complete videos so useful is that nobody builds cabinets exactly the same way so if I watch a complete build video and then your individual procedure video I end up reconciling the little differences between te techniques and I might miss the important aspects of your workflow like the fact that you do the edge banding before you make the LR32 holes.  So while your current videos really have been fantastic I see great value in seeing a start to finish video series of your particular workflow.

 

[erock]

Wow! Good stuff mang!! Music Montages, credits..Loving the progress! And the content is great, I would have no idea what to do with that LR32 thingy, but thanks to you I am interested and following these.

Thanks dude!  All in good time my friend, you will find a reason to pick up the LR32 "thingy" LOL

Just like the rest of the Festool line, just when you think you have what you need, you find a reason too buy more!  [tongue]

And the music comes from the  engineer I work with.  He's working on more music for me too use. 

Eric

 

[erock]

There are lots of videos of individual procedures and a few of complete cabinet construction.  What makes the complete videos so useful is that nobody builds cabinets exactly the same way so if I watch a complete build video and then your individual procedure video I end up reconciling the little differences between te techniques and I might miss the important aspects of your workflow like the fact that you do the edge banding before you make the LR32 holes.  So while your current videos really have been fantastic I see great value in seeing a start to finish video series of your particular workflow.

Well, I did buy a sheet of plywood from Lowe's yesterday.  A sheet of 18mm maple originally  priced at $51 I picked up for $25 because it had a couple

deep scratches on it......so, maybe I could use that for a complete build video.  I bought it because it was cheaper then a sheet of 3/4" MDF which I use

for jigs.  Let me talk to my talent agent and check my schedule,  [scared]  [tongue]

I have a couple more videos in mind for the LR32 I want to finish first,  so after that let me think about it.

Thanks,
Eric

 

[JoggleStick]

G'day Eric,
I'd like to see you do a video on a complete cabinet... For a couple of reasons...

Firstly, as you've no doubt gathered by now, there are many ways to 'skin the cat'... Point being that you've already given us a fair slab of your work-flow. A complete cabinet would help greatly to 'fill in the gaps'. I personally enjoy watching others work-flow as invariably I pick up little tweaks and quirks and whatnot.

Secondly, because you have a very pleasant and natural manner, your videos are enjoyable to watch.

All the best and thanks for your time and effort, it is appreciated.

Andrew

 

[nclemmons]

Eric

These videos are really well done.  Great content and production quality.  Thanks for sharing them.  I'm sure they take a lot of your time.

neil

 

[erock]

Eric

These videos are really well done.  Great content and production quality.  Thanks for sharing them.  I'm sure they take a lot of your time.

neil

Neil,
  Thanks for the feedback.  It does take a while to produce a 10 minute video.  Especially  with my vintage laptop purchased in 2010. 

I'm thinking about upgrading my system.

Eric

 

[farms100]

fantastic video series!  you have done a really nice job explaining the 32 mm system. its a great companion to the various books and articles about the system.

I'm waiting for an excuse to pick up the LR32 myself.

 

[Alli]

Hi Eric,

Thanks for some great vids on using the LR32. I've got some cabinets to do soon, I think you twisted my arm to invest in the system, it looks great.

I hope you do some other videos using other festool systems, I found these very informative.

Cheers
David

 

[erock]

Hi Eric,

Thanks for some great vids on using the LR32. I've got some cabinets to do soon, I think you twisted my arm to invest in the system, it looks great.

I hope you do some other videos using other festool systems, I found these very informative.

Cheers
David

Dave
[thumbs up]      just a little twist!  Once you pick it up and practice with it, please share what you make with it.

Thanks,
Eric

 

[erock]

fantastic video series!  you have done a really nice job explaining the 32 mm system. its a great companion to the various books and articles about the system.

I'm waiting for an excuse to pick up the LR32 myself.

The excuse is you can use it for more then line boring.  You can use it to make a MFT  top or other creative things.  I've used it to make a jig or two !  [wink]

Thanks,
Eric

 

[Samo]

Eric,

We need another Video!  I grabbed my Cutie and poured her some Chardonnay.  We cuddled up and I put on your last Video.  She got all bored and wanted to watch Castle!

What's up with that?

I have some Orville Redenbacher all ready to go.  [popcorn]

Sam

 

[fshanno]

Eric,

We need another Video!  I grabbed my Cutie and poured her some Chardonnay.  We cuddled up and I put on your last Video.  She got all bored and wanted to watch Castle!

What's up with that?

I have some Orville Redenbacher all ready to go.   [popcorn]

Sam

I bet Castle could get into Festool.  And he would love these videos and Beckett would be bored.

 

[rrmccabe]

I am really enjoying the videos !

Thanks for doing it.

But have to say...  do you like spinach. LOL

 

[erock]

Eric,

We need another Video!  I grabbed my Cutie and poured her some Chardonnay.  We cuddled up and I put on your last Video.  She got all bored and wanted to watch Castle!

What's up with that?

I have some Orville Redenbacher all ready to go.   [popcorn]

Sam

[thumbs up]  [big grin]  Good one Sam

 

[erock]

I am really enjoying the videos !

Thanks for doing it.

But have to say...  do you like spinach. LOL

Spinach?  Um....I do in my juice drinks and salads.

 

[rrmccabe]

Spinach?  Um....I do in my juice drinks and salads.

LOL, you have arms like Popeye.

I hope I never make you angry