Yup 446 658.
Birdhunter said:Is the #2 Sustainer the right one for both 5" and 4" disks? I like the idea of making my own "innards".
Brice Burrell said:Birdhunter said:Is the #2 Sustainer the right one for both 5" and 4" disks? I like the idea of making my own "innards".
Yes.
GaryLaroff said:Nick,
Thank you. I was looking for a source for the DX 93 E insert and one for the appropriate abrasives.
Gary
Sparktrician said:Why not make your own insert for an empty Sys3 and size it to fit your needs? This is what I did for my own RO125. I bought an empty Sys3 and the foam inserts for top and bottom, then made a grid using 1/4" Baltic birch plywood.
wow said:Sparktrician said:Why not make your own insert for an empty Sys3 and size it to fit your needs? This is what I did for my own RO125. I bought an empty Sys3 and the foam inserts for top and bottom, then made a grid using 1/4" Baltic birch plywood.
Willy:
This is probably a stupid question, but it seems like there is quite a bit of space on top of your abrasives. If a person was really careful do you think you could fit the RO 150 abrasives in a Sys2 or is that a little too shallow? The stated depth is 157.5 mm, but I don't know how much you loose to the lid or the ribs?
SRSemenza said:I saw a suggestion to go through the stack alternating the sheets front to front then back to back to prevent clinging. I have not tried it.