adapter or bespoke festool fit router guide bushes

[ajones]

Hi is there any interest in either and adapter to fit the of1010 to allow the use of trend type guide bushes or bespoke festool fit guide bushes in sizes that are missing from the festol line up?

 

[galwaydude18@gmail.com]

You can buy an adaptor from festool for that!

 

[Roseland]

And for threaded guide bushes (such as for the Leigh Jigs):

http://www.axminster.co.uk/leigh-leigh-adaptors-for-threaded-guide-bushes-prod20346/

Andrew

 

[ajones]

You can buy an adaptor from festool for that!

what adapter got a part no,

 

[galwaydude18@gmail.com]

http://www.mcfeelys.com/product/469625/Guide-bushing-adaptor-for-OF-1010

This is the one I have.

 

[ajones]

http://www.mcfeelys.com/product/469625/Guide-bushing-adaptor-for-OF-1010

This is the one I have.

So do you have a set of imperial bushes for that adapter? and can you get metric bushes to fit also?

 

[neth27]

You can get 16 and 30mm from Trend to fit it.

John..

 

[Timtool]

http://www.mcfeelys.com/product/469625/Guide-bushing-adaptor-for-OF-1010

This is the one I have.

Can you confirm that adapter allows to place the trend guide bush for the DC400 dovetail center?
Very good question you brought up Footstool, i had a dedicated Bosch router for DC with the special adapter baseplate, but once i tried my 1010 on it and i realised how awfull the Bosch was and i sold it. But putting on and off that Trend universal baseplate is a cumbersome nightmare.

 

[ajones]

http://www.mcfeelys.com/product/469625/Guide-bushing-adaptor-for-OF-1010

This is the one I have.

Can you confirm that adapter allows to place the trend guide bush for the DC400 dovetail center?
Very good question you brought up Footstool, i had a dedicated Bosch router for DC with the special adapter baseplate, but once i tried my 1010 on it and i realised how awfull the Bosch was and i sold it. But putting on and off that Trend universal baseplate is a cumbersome nightmare.

Yes that is one of the two bushes I  want one for the dc400 and the 16mm for a hinge jig

 

[galwaydude18@gmail.com]

I use the trend two part 16mm guide bush with the adaptor for my Trend hinge jig.

 

[ajones]

http://www.mcfeelys.com/product/469625/Guide-bushing-adaptor-for-OF-1010

This is the one I have.

Can you confirm that adapter allows to place the trend guide bush for the DC400 dovetail center?
Very good question you brought up Footstool, i had a dedicated Bosch router for DC with the special adapter baseplate, but once i tried my 1010 on it and i realised how awfull the Bosch was and i sold it. But putting on and off that Trend universal baseplate is a cumbersome nightmare.

the trend dc400 guide bush is 7/16ths or 11.1mm is there a us style bush available in this size?

 

[neth27]

These are the one trend do http://www.google.co.uk/products/catalog?q=trend+GB/US/D++guide+bushes&hl=en&client=safari&rls=en&bav=on.2,or.r_gc.r_pw.r_qf.&bvm=bv.1355534169,d.d2k&bpcl=40096503&biw=1680&bih=952&um=1&ie=UTF-8&cid=7916704339576024296&sa=X&ei=0z_SUPrMC-TB0gX_-4DgDw&ved=0CE0Q8wIwAA#ps-sellers

John....

 

[ajones]

Thanks John for finding that I could not find them on the trend wesite