Hi all,
I have a Triton dust collection bucket as per attached pic. The inner diameter of those holes is 28mm, and the outer diameter just under 32mm (the Triton hoses are 32mm inner diameter, so they fit over the outer side of the holes / connectors).
The CTL 26 E comes with a D 27/32 hose.
Any ideas on where to get (preferably in Europe) the correct adapter to make the two fit?
Also, I read that the D 27/32 has a "Conical geometry (27 mm to 32 mm) for improved suction power". I've measured every part of this D 27/32 hose inside, out, and sideways and nothing seems to be close to 27 or 32 anywhere. Which part exactly are these measurements referring to?
Sorry - new to Festool dust extration.
I have a Triton dust collection bucket as per attached pic. The inner diameter of those holes is 28mm, and the outer diameter just under 32mm (the Triton hoses are 32mm inner diameter, so they fit over the outer side of the holes / connectors).
The CTL 26 E comes with a D 27/32 hose.
Any ideas on where to get (preferably in Europe) the correct adapter to make the two fit?
Also, I read that the D 27/32 has a "Conical geometry (27 mm to 32 mm) for improved suction power". I've measured every part of this D 27/32 hose inside, out, and sideways and nothing seems to be close to 27 or 32 anywhere. Which part exactly are these measurements referring to?
Sorry - new to Festool dust extration.
