Adjusting the extension on the Kapex

[mastercabman]

I have made my own extensions for my kapex by attaching a piece of 1/2" ply to the crown stops that i have.
I have been using a bosch stand for my kapex and use the arms on the stand to hold those extension that i made.
But i don't like the stand that i have(too heavy,too bulky....)So i am going to use a table/stand made by vika and add a 2x2 piece of wood on my extensions so that it will be supported.I am going to attach those 2x2 to a folding table bracket.But i don't how to make it so that i can adjust the height.
I can mount the bracket at a slight angle and i would just need to move the leg(s)for the proper height.
Anyone have a better idea?    how do you like to adjust those legs on the extension that festool offers?

 

[packratpop]

Thinking about doing the same thing and have looked at various posts. One solution used a two part leg. One section of the leg had a slot in it which allowed for adjustment using a wing but and bolt. Hope that made sense.

 

[nclemmons]

http://festoolownersgroup.com/festool-jigs-tool-enhancements/extension-wings-for-kapex/

read to the bottom on how I did this.

neil